JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Trident Boat Wet Exhaust Hose 100-0340 | Water Reinforced 3/4 ID (FT)
Boat part number 1101626 is a new, off the roll, increment of Trident Flex 3/4" ID wet exhaust hose from Trident Marine, part number 100-0340 .
made for Custom Applications
$6.95 MSRP: $10.73
GLS Stock #: 1101626-GJ810
Only 1 left
Boat part number 1101626 is a new, off the roll, increment of Trident Flex 3/4" ID wet exhaust hose from Trident Marine, part number 100-0340 .
Trident Flex wet exhaust hose is designed for longer, bent connections and with 3/4" ID, is good for engine intake, critical water, drain, cupper bilge and sanitation uses, per manufacturer. Constructed out of high temperature black EDPM rubber with wire helix between 2-ply reinforcement, this hose has a resistance to heat, ozone, exhaust, and collapse.
Stamp on hose reads: TRIDENT-FLEX MARINE WET EXHAUST / WATER HOSE 200°F (93°C) MX. 100-0340 3/4" (19mm)
Sold in one foot increments. Simply enter the number of feet you desire in the quantity field. Lengths are sold as continuous feet.
Specifications:
Trident Flex wet exhaust hose is designed for longer, bent connections and with 3/4" ID, is good for engine intake, critical water, drain, cupper bilge and sanitation uses, per manufacturer. Constructed out of high temperature black EDPM rubber with wire helix between 2-ply reinforcement, this hose has a resistance to heat, ozone, exhaust, and collapse.
Stamp on hose reads: TRIDENT-FLEX MARINE WET EXHAUST / WATER HOSE 200°F (93°C) MX. 100-0340 3/4" (19mm)
Sold in one foot increments. Simply enter the number of feet you desire in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Part Manufacturer: Trident Marine
- Series: 100 Series Trident Flex
- Year: 2020
- Part Number: 100-0340
- Material: EDPM Rubber
- Color: Black / Blue
- Maximum Temperature: 200°F (93°C)
- Wire Reinforcement: Yes (Wire Helix / 2-ply)
- Working Pressure: 100 PSI (6.9 Bar)
- Inner Diameter: 3/4" ID
- Outer Diameter: 1 1/8" OD
- Bend Radius: 1"
- Length: Sold by the Foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.