Sea Ray Boat Seal Molding 1966254 | 3/8 x 5/16 Black X2399BT (FT)
Boat part number 8502005 is a new, off the roll, increment of 3/8" wide adhesive beveled seal molding from Trim-Lok, part number X2399BT .
made for Sea Ray Boats
$2.49 MSRP: $3.36
GLS Stock #: 8502005-GJ842
273 in stock
Boat part number 8502005 is a new, off the roll, increment of 3/8" wide adhesive beveled seal molding from Trim-Lok, part number X2399BT . Commonly used on Sea Ray boats, part number 1966254 .
Constructed out of black EPDM sponge rubber, this seal molding measures approximately 3/8" wide x 5/16" high (tapers to 1/4" high) overall. Has a self-adhesive strip, and an approximately 3/16" wide open cell. Resistant to sunlight aging, low temperatures, water, ozone, and compression set, per manufacturer. Has a general temperature rating of -20°F to 158°F.
Sold by the running foot. Simply enter the number of feet needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
Constructed out of black EPDM sponge rubber, this seal molding measures approximately 3/8" wide x 5/16" high (tapers to 1/4" high) overall. Has a self-adhesive strip, and an approximately 3/16" wide open cell. Resistant to sunlight aging, low temperatures, water, ozone, and compression set, per manufacturer. Has a general temperature rating of -20°F to 158°F.
Sold by the running foot. Simply enter the number of feet needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Boat Manufacturer: Sea Ray Boats
- Model/Year: Unavailable
- Part Number: 1966254
- Part Manufacturer: Trim-Lok
- Part Number: X2399BT
- Materials: Rubber
- Color: Black
- Overall Dimensions: 3/8" W x 5/16" H
- Mounts: 1/4" wide adhesive strip
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.
Product Questions
I’m looking for a replacement gasket for the sliding door on my 2021 SeaRay Sundancer.
Question by: Jack on Jul 19, 2022, 10:07 PM
Hello Jack,
I'm very sorry, but we are not able to cross reference gasket/molding to specific boats. About all we can suggest is to contact a Sea Ray dealer.
Gene
I'm very sorry, but we are not able to cross reference gasket/molding to specific boats. About all we can suggest is to contact a Sea Ray dealer.
Gene
Answer by: Admin on Jul 21, 2022, 10:45 AM
I want to replace the rubber stripping holding the glass windows in the cabin for a 1989 Sea Ray 300 Sedan Bridge. What product do Ineed to get?
Question by: Cary Pong on Jun 23, 2021, 11:07 AM
Hello Cary,
I'm afraid we have no way to cross reference molding/gaskets to specific boats and it isn't something we can source or order. You'd pretty much need to scroll through our current options at the links below to see if you recognize what you need.
Link: https://www.greatlakesskipper.com/boat-parts/boat-molding
Sorry we could not help more Cary,
Gene
I'm afraid we have no way to cross reference molding/gaskets to specific boats and it isn't something we can source or order. You'd pretty much need to scroll through our current options at the links below to see if you recognize what you need.
Link: https://www.greatlakesskipper.com/boat-parts/boat-molding
Sorry we could not help more Cary,
Gene
Answer by: Gene Warmuth on Jun 23, 2021, 12:45 PM
Can I mail a small piece of my existing rubber front window trim to get a match. It is from a 26' Harbercraft Kingfisher aluminum boat. What address would I send it to?
Question by: Steven Byers on Mar 12, 2021, 1:26 PM
Hello Steven,
I'm afraid we aren't set up for that. We have molding in multiple locations in multiple warehouses and just aren't able to do that. Sorry.
Gene
I'm afraid we aren't set up for that. We have molding in multiple locations in multiple warehouses and just aren't able to do that. Sorry.
Gene
Answer by: Gene Warmuth on Mar 12, 2021, 1:32 PM