Triton Boat Earl Bentz Decal 7604031 | 7 1/2 x 1 1/8 Inch Black Taupe - All Questions
Triton Boat Earl Bentz Decal 7604031 | 7 1/2 x 1 1/8 Inch Black Taupe
SKU
7102734
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Is the the raised decal that is on both sides of the boat on the top cap near the rear of the boat?
Question by: Allen Barba on Mar 30, 2023, 4:24 AM
Hello Allen,
Since we are not dealers, I'm afraid we aren't familiar with the positioning of any of the Triton decals we have. If you are speaking of this specific decal, it isn't actually raised - it is flat vinyl. All our raised Triton graphics are shown here:
link: https://www.greatlakesskipper.com/search/?q=Triton+raised
Gene
Since we are not dealers, I'm afraid we aren't familiar with the positioning of any of the Triton decals we have. If you are speaking of this specific decal, it isn't actually raised - it is flat vinyl. All our raised Triton graphics are shown here:
link: https://www.greatlakesskipper.com/search/?q=Triton+raised
Gene
Answer by: Admin on Mar 30, 2023, 8:33 AM