Volvo Penta Exhaust Riser 3888846 | 3 Inch w/ Gaskets (Kit)

Boat part number 1067730 is a new exhaust service/riser kit with gaskets from Volvo Penta, part number 3888846 .

Constructed of durable cast iron and stainless steel, this is a 3 inch riser/service kit. An exhaust riser raises the level of the exhaust elbow. This is installed at or below the water line. The riser reduces the risk of siphonage back into the engine via the exhaust system.

This kit fits the following engines:

• 4.3GL-GF, 4.3GL-J, 4.3GL-P, 4.3GXI-G, 4.3GXI-GF, 4.3GXI-J, 4.3GXI-JF, 4.3GXI-P, 4.3GXI-Q, 4.3GXIE-M, 4.3GXIE-P, 4.3GXIE-Q, 5.0GL-H, 5.0GL-HF, 5.0GL-J, 5.0GXI-G, 5.0GXI-GF, 5.0GXI-JF, 5.0GXI-N, 5.0GXI-P, 5.0GXIE-J, 5.0GXIE-JF, 5.0GXIE-K, 5.0GXIE-KF, 5.0GXIE-M, 5.0GXIE-P, 5.7GI-300-J, 5.7GI-300-JF, 5.7GI-300-N, 5.7GI-300-P, 5.7GI-G, 5.7GI-GF, 5.7GIE-300-J, 5.7GIE-300-JF, 5.7GIE-300-K, 5.7GIE-300-KF, 5.7GIE-300-M, 5.7GIE-300-MF, 5.7GIE-300-N, 5.7GIE-300-P, 5.7GXI-HF, 5.7GXI-J, 5.7GXI-JF, 5.7GXI-P, 5.7GXIE-J, 5.7GXIE-K, 5.7GXIE-KF, 5.7GXIE-M, 5.7GXIE-MF, 5.7GXIE-N, 5.7GXIE-P

The exhaust riser is a glossy black in color and measures approximately 27 1/4" L x 17" H overall. This exhaust pipe is raised approximately 3" and has a mounting base that measures 5" L x 5 1/4" H. There are (4) 1/2" dia. mounting holes along the perimeter of the base. The ends of this exhaust pipe are filtered by 1/2" diameter slotted holes. The tube diameter is approximately 3 1/2" overall.

The gaskets are a black powder coated color and each measure approximately 12 1/2" L x 11 1/4" H x 5" W overall. The base itself measures approximately 5" L x 3 1/4" H and has (4) 1/2" dia. mounting holes that line up with another (4) mounting holes of the same size. Each gasket has (1) 1/4" dia. threaded mounting hole and (1) 3/8" dia. threaded mounting hole with a 3/4" dia. opening. There is also (1) 3" diameter pipe connection opening.

This kit includes:

• (1) Seal - Transom Shield to Y-Pipe | P/N: 3841013
• (2) Gaskets | P/N: 3863191
• (1) Y-Pipe Assembly - Exhaust, 3" Tall Riser | P/N: 3863191
• (1) Plug - Exhaust Bypass, Y-Pipe | P/N: 3888557
• (4) Plug, Exhaust (3/8" Hex Head) | P/N: 3852830
• (2) Riser, Exhaust - Tall Exhaust Pipe | P/N: 3862627
• (8) Screw - Elbow to Exhaust Manifold | P/N: 3852830
• (8) Washer - Exhaust Elbow to Manifold | P/N: 980933
• (8) Washer, Lock - Elbow to Exhaust Manifold | P/N: 3852002
• (2) Installation Manuals

Specifications:

• Part Manufacturer: Volvo Penta
• Part Number: 3888846
• Material(s): Stainless Steel / Cast Iron
• Color: Black
• Finish: Glossy / Powder Coated
• Pipe Dimensions: 27 1/4" L x 17" H
• Raise: 3"
• Pipe Diameter: 3 1/2" ODia.
• Gasket Dimensions: 12 1/2" L x 11 1/4" H x 5" W
• Gasket Opening: 3" Dia.
• Pipe Mounts: (4) 1/2" Dia. mounting holes
• Gasket Mounts: (4) 1/2" Dia. mounting holes / (1) 1/4" dia. threaded / (1) 3/8" dia. threaded