
Carver Boat Autopilot Course Computer 6955965 | IPS / DPU C/E Module
Boat part number is a new autopilot course computer from Raymarine Electronics, part number E12177 / E12178
made for Carver Yachts
Special Price $2,616.56 MSRP: $3,968.93
GLS Stock #: 8700527-FH692
Only 1 left
Boat part number is a new autopilot course computer from Raymarine Electronics, part number E12177 / E12178 . Commonly used on Carver Yachts, part number 6955965 . May be used on other boats.
This is a gray autopilot course computer with IPS DPU module, compatible with Volvo Penta IPS drives. Measures approximately 12" L x 7 5/8" W x 2 1/8" H overall. Has (2) 3/8" Dia. mounting holes.
Features Per Manufacturer:
This is a gray autopilot course computer with IPS DPU module, compatible with Volvo Penta IPS drives. Measures approximately 12" L x 7 5/8" W x 2 1/8" H overall. Has (2) 3/8" Dia. mounting holes.
Features Per Manufacturer:
- ST6001/2 Control Head
- Rudder Reference
- Fluxgate Compass
- C/E Series unit
- DVM (Digital Volt Meter)
- 12V DC 10A PSU (Power Supply Unit)
- Type 1 Pump
- Conventional 330 Ohm Resistor, Rated at 1 Watt
- Boat Manufacturer: Carver Yachts
- Part Number: 6955965
- Part Manufacturer: Raymarine Electronics
- Part Number: E12177 / E12178
- Materials: Plastic
- Colors: Gray
- Overall Dimensions: 12" L x 7 5/8" W x 2 1/8" H
- Mounts: (2) 3/8" Dia. Holes
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Is this compatible with a 2001Carver 396?
Question by: James Daugherty on Jan 19, 2021, 11:39 AM
Hello James,
Thank you for your interest in Great Lakes Skipper. This should cross over and work on most Carver models, to be sure we could recommend contacting a local Carver dealer as they will be able to confirm that. Thank you and have a great day.
Ethan
Thank you for your interest in Great Lakes Skipper. This should cross over and work on most Carver models, to be sure we could recommend contacting a local Carver dealer as they will be able to confirm that. Thank you and have a great day.
Ethan
Answer by: Ethan Doro on Jan 19, 2021, 2:18 PM