Carver Boat LED Rope Light 6427101 | Imtra 3/8 Blue 12V Lighting (FT)

Boat part number 8701300 is a new, off the roll, increment of Imtra 3/8" LED rope lighting, part number ILMDL-BL-12LED . Commonly used by Carver Yachts and Marquis Yachts, part number 6427101 . Please note, 1st image is a manufacturer image to illustrate color of LED. We are selling the LED rope light only.

3/8" LED Rope Lighting. 12V. Blue LED.

The following required parts must be purchased separately from Imtra or authorized dealer to complete your rope light installation:

• For 12VDC input (from battery, DC breaker panel or DC power supply):
  • ILMDL-CONKIT-6, Connector Kit for 3/8" Incandescent or DC-Powered LED Rope Light (Connector & 6' Cord)
  • ILMDL-END, End Cap
• For 12VAC input (from step down transformer):
  • ILMDL-CON12V-L6, Connector Kit for 3/8" 12VAC LED Rope Light when using Transformer (Connector, Rectifier & 6' Cord)
  • ILMDL-END, End Cap

Imtra's low voltage (12V or 24V) LED rope light may also be used for residential / commercial use as well; however, it will not be supplied with an AC adapter or other means for stepping the voltage down as that must be ordered separately.

Sold by the running foot. Simply enter the number of feet needed in the quantity field. Lengths are sold as continuous feet.

Specifications:

• Boat Manufacturer: Carver Yachts / Marquis Yachts
• Part Number: 6427101
• Part Manufacturer: Imtra Corporation
• Part Number: ILMDL-BL-12LED
• Type: LED Rope Lighting
• Color: Blue
• Power Consumption: 0.87W
• Amp Draw: 0.04 A/Ft
• Voltage: 12V
• Bulb Spacing: 1"
• Bulb Orientation: Horizontal
• Recommended Air Temp Range: -4° to 122° F
• Safety Standards Compliance: CE-EMC, UL 2388
• Cutability: Every 3"
• Rope Diameter: 3/8"
• Length: Sold by the Foot
• MSRP: $5.95 per FT

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included.

This product is cut to length and we cannot accept returns or cancellations on any cut to length product.