Clean Seal Boat Window Molding 5036H2 | Adhesive 5/8 x 3/4 Inch (FT)

Boat part number 1073171 is a new, off the roll, increment of D-type slide out window seal molding from Clean Seal, part number 5036H2 .
made for Crownline Boats
$2.49 MSRP: $3.36
GLS Stock #: 1073171-PK180
74 in stock

Clean Seal Boat Window Molding 5036H2 | Adhesive 5/8 x 3/4 Inch (FT)

Boat part number 1073171 is a new, off the roll, increment of D-type slide out window seal molding from Clean Seal, part number 5036H2 . Commonly used on Crownline Boats, part number 59583, may be used on other boats.

This D-type seal is constructed out of black EPDM foam rubber and features an open cell and a 1/4" slide out tab. It measures approximately 5/8" W x 3/4" D overall and it has an approximate 5/8" black acrylic-based PSA (Pressure Sensitive Adhesive) adhesive strip. Acrylic adhesives are polar in nature and tend to stick well to polar substrates such as metals, glass, polyesters, polycarbonates, and neoprenes.

Sold by the running foot. Simply enter the number of feet desired in the quantity field. Lengths are sold as continuous feet.

Specifications:
  • Boat Manufacturer: Crownline Boats
  • Model/Year: Unavailable
  • Part Number: 59583
  • Part Manufacturer: Clean Seal
  • Type: D Open Cell
  • Part Number: 5036H2
  • Color: Black
  • Material: EPDM foam rubber
  • Overall Measurements: 5/8" W x 3/4" H
  • Length: Sold by the linear foot
Simply peel off and apply to any dry, clean surface. Please allow surface a minimum of 24 hours to dry before applying decals and/or pinstripe.

This product is cut to length and we cannot accept returns or cancellations on any cut to length product.


Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This product is cut to length and we cannot accept returns or cancellations on any cut to length product.

Please allow surface a minimum of 24 hours to dry before applying decals and/or pinstripe.