Excel Boat Gauge Panel EX-24-16 | 17 1/4 Inch Black Silver
Boat part number 1103785 is a new gauge panel for Excel Boats, part number EX-24-16 .
made for Excel Boats
$449.95 MSRP: $607.43
GLS Stock #: 1103785-NJ505
Only 1 left
Boat part number 1103785 is a new gauge panel for Excel Boats, part number EX-24-16 . May be used on other boats.
This gauge panel is constructed out of black plastic with a faux carbon fiber finish. Measures approximately 17 1/4" L x 11 1/4" H overall. Mounts with (7) 3/16" Dia. mounting holes.
This dash panel features (3) Faria gauges and (1) 2" Dia. blank filler. Each clear halogen illuminated with flat lenses, black bezels, black faces, white needles, and white graphics.
Features the following Faria gauges:
This gauge panel is constructed out of black plastic with a faux carbon fiber finish. Measures approximately 17 1/4" L x 11 1/4" H overall. Mounts with (7) 3/16" Dia. mounting holes.
This dash panel features (3) Faria gauges and (1) 2" Dia. blank filler. Each clear halogen illuminated with flat lenses, black bezels, black faces, white needles, and white graphics.
Features the following Faria gauges:
- (1) Speedometer | P/N: SE9463K | Pitot
- (1) Tachometer w/ Systems Check | P/N: TC9951E | 10/12 Pole | Gasoline
- (1) Fuel Level | P/N: GP9357C | 33-240 Ohm
- (1) NAV/ANC | Rocker | On/Off/On
- (1) Bilge Pump | Rocker | On/Off
- (1) Aerator | Rocker | On/Off
- (1) Horn | Rocker | Momentary On/Off
- (5) Push-to Reset | Push Button
- (1) Dual USB Receptacle
- (1) 12V Receptacle
- Boat Manufacturer: Excel Boats
- Part Number: EX-24-16
- Part Manufacturer: Faria | Ultra Panel Marine
- Part Number: SE9463K / TC9951E / GP9357C | EX-24-16
- Material: Plastic
- Color: Black / Silver
- Finish: Glossy
- Overall Dimensions: 17 1/4" L x 11 1/4" H
- Mounts: (7) 3/16" Dia. Holes
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.