Lantor Soric 3mm Core TF1003 | White 50"x164' (Roll)
Boat part number 1076406 is a new roll of Lantor Soric TF 3mm core from Tiara Yachts, part number 2103210 .
made for Tiara Yachts
$699.95 MSRP: $934.45
GLS Stock #: 1076406-PK486
Only 1 left
Boat part number 1076406 is a new roll of Lantor Soric TF 3mm core from Tiara Yachts, part number 2103210 .
Soric TF is the ideal product for the most demanding cosmetic and surface finish requirements. Soric TF can be used as a core, but is most often used as a print blocker in infused laminates. The most cost effective solution for closed mold processes including Infusion,RTM Light, RTM Heavy and is pressure stable polyester nonwoven and compatible with all regular types of resin, including Polyester, Vinylester, Phenolic and Epoxy.
Common applications include: marine hulls, decks, structures of boats and yachts, car parts and panels, trailers, trucks and RV's, bus and train interiors, light rail buses, kayaks, surfboards, fans, containers and tanks, nacelle covers and spinners too!
Specifications:
Soric TF is the ideal product for the most demanding cosmetic and surface finish requirements. Soric TF can be used as a core, but is most often used as a print blocker in infused laminates. The most cost effective solution for closed mold processes including Infusion,RTM Light, RTM Heavy and is pressure stable polyester nonwoven and compatible with all regular types of resin, including Polyester, Vinylester, Phenolic and Epoxy.
Common applications include: marine hulls, decks, structures of boats and yachts, car parts and panels, trailers, trucks and RV's, bus and train interiors, light rail buses, kayaks, surfboards, fans, containers and tanks, nacelle covers and spinners too!
Specifications:
- Boat Manufacturer: Tiara Yachts
- Part Number: 2103210
- Part Mfg: Lantor
- Part Number: TF1003
- Model: Soric TF
- Color: White
- Thickness Loss at 0,8 Bar%: <25
- Resin Uptake: 1.4 kg/m2
- Dry Weight: 170 g/m2
- Density Impregnated: 700 kg/m3
- Flexural Strength: 19 MPa
- Flexural Modulus: 1500 MPa
- Tensile Strength Across Layers: 7 MPa
- Compression Strength 10% Strain: 4 MPa
- Shear Strength: 7 MPa
- Shear Modulus: 34 MPa
- Thickness: 3mm
- Roll Width: 50"
- Length: 164.04 Ft (685 sq.ft)
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
I own a skateboard manufacturing company in the Seattle area. Specifically, I'm looking to incorporate a strong, but light weight, element into my skateboards. Right now I cold press 7 layers of maple veneer - each layer is roughly 1/20" thick. I'd like to replace a couple layers with a lighter product. The challenge is that the skateboards have a lot of curvature and the press is a cold press. I came across the Soric product and it looks promising. It could definitely form to my moulds, but I don't know enough about its properties to understand if it would replace the strength of the veneer. Also, would it work with my polyurethane adhesive that I use in the press application?
If this product isn't right, are there any other products that you sell that may work?
I'd love to test it out to make sure it works before buying a roll. Do you have smaller pieces for sale?
If this product isn't right, are there any other products that you sell that may work?
I'd love to test it out to make sure it works before buying a roll. Do you have smaller pieces for sale?
Question by: scott on Jun 4, 2020, 7:49 PM
Hi Scott,
I love it! I have been skateboarding for over 15 years so this is great. Anyway I can help..
We do have stock # 1064916 sold by the foot. It is 2mm instead of 3 like the roll. I cannot cut off the full roll, but if you want to try the 2mm, I can send a little sample of the 3mm to get an idea if it helps.
The product is designed to be used with any type of resin, so I do not know if the polyurethane adhesive would be a problem, but there is no way of knowing without trying. Let me know what you are thinking!
Jake
I love it! I have been skateboarding for over 15 years so this is great. Anyway I can help..
We do have stock # 1064916 sold by the foot. It is 2mm instead of 3 like the roll. I cannot cut off the full roll, but if you want to try the 2mm, I can send a little sample of the 3mm to get an idea if it helps.
The product is designed to be used with any type of resin, so I do not know if the polyurethane adhesive would be a problem, but there is no way of knowing without trying. Let me know what you are thinking!
Jake
Answer by: Jake Doro on Jun 5, 2020, 11:10 AM