
Larson Boat Tiller Dash Panels K-050-297 | Aluminum (Set of 3)
Boat part number 1091972 is a new tiller dash panel set from Larson Boats, part number K-050-297 .
made for Larson Boats
$349.95
GLS Stock #: 1091972-FB633
Only 3 left
Boat part number 1091972 is a new tiller dash panel set from Larson Boats, part number K-050-297 .
This dash panel set is constructed out of aluminum. The middle rectangular panel measures approximately 6 3/8" W x 6 1/2" H. This panel mounts with (4) 1/8" OD holes set apart 5 7/8" apart center to center.
The two side panels measure approximately 3" W x 5 5/8" H each. These panels mount with (4) 1/8" OD holes set apart 5 5/8" center to center.
These panels feature (9) push to reset breaker switches, (8) illuminated rocker switches, and (1) 12 volt socket.
Featured Rocker Switches:
This dash panel set is constructed out of aluminum. The middle rectangular panel measures approximately 6 3/8" W x 6 1/2" H. This panel mounts with (4) 1/8" OD holes set apart 5 7/8" apart center to center.
The two side panels measure approximately 3" W x 5 5/8" H each. These panels mount with (4) 1/8" OD holes set apart 5 5/8" center to center.
These panels feature (9) push to reset breaker switches, (8) illuminated rocker switches, and (1) 12 volt socket.
Featured Rocker Switches:
- (1) Livewell | On/Off/On
- (1) Oxygenator | On/Off/On
- (1) Courtesy | On/Off
- (1) Radio | On/Off
- (1) Horn | Momentary
- (1) Master Power | On/Off
- (1) Bilge | On/Off
- (1) Nav Lights | On/Off/On
- Boat Manufacturer: Larson Boats
- Model/Year: Unavailable
- Part Number: K-050-297
- Material: Aluminum
- Color: Black/Gray
- Overall Dimensions: 6 3/8" W x 6 1/2" H / 3" W x 5 5/8" H each
- Mounts: (4) 1/8" OD Holes Set Apart 5 7/8" Apart CTC / (4) 1/8" OD Holes Set Apart 5 5/8" CTC
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.