
Lund Boat Gauge Panel 2241519 | Mercury 15 3/8 x 4 5/8 Inch Woodgrain
Boat part number 8303961 is a new gauge panel for Lund Boats, part number 2241519 .
made for Lund Boats
Special Price $311.46 MSRP: $472.43
GLS Stock #: 8303961-FK890
Only 7 left
Boat part number 8303961 is a new gauge panel for Lund Boats, part number 2241519 .
This gauge panel panel is constructed from black faux woodgrain colored marine grade plastic with a glossy finish. It measures approximately 15 3/8" W x 4 5/8" H overall. It has (1) 4-spade male and (1) 2-pin male connections.
This panel has (4) pre-installed SmartCraft gauges from Mercury Marine. Each clear halogen illuminated gauge has a domed lens, silver colored bezel, white face, black / orange needle, and black graphics.
This panel features the following gauges:
Specifications:
This gauge panel panel is constructed from black faux woodgrain colored marine grade plastic with a glossy finish. It measures approximately 15 3/8" W x 4 5/8" H overall. It has (1) 4-spade male and (1) 2-pin male connections.
This panel has (4) pre-installed SmartCraft gauges from Mercury Marine. Each clear halogen illuminated gauge has a domed lens, silver colored bezel, white face, black / orange needle, and black graphics.
This panel features the following gauges:
- (1) Fuel | P/N: 895291A41
- (1) Tachometer | P/N: 895283A45 | Gasoline | 4/6/8 cylinder inboard and 2/3/4/5/6 pole outboard
- (1) Speedometer | P/N: 895285A43 | (1) pitot connection
- (1) Trim | P/N: 895292A41 | Mercury engines
Specifications:
- Boat Manufacturer: Lund
- Model/Year: Unavailable
- Part Number: 2241519
- Part Manufacturer: Unavailable
- Part Number: F2242241519
- Material: Plastic
- Color: Black Faux Woodgrain
- Finish: Glossy
- Overall Dimensions: 15 3/8" W x 4 5/8" H
- Mounts: None
- Fuel: Gasoline
- Set Up For: 4/6/8 cylinder inboard and 2/3/4/5/6 pole outboard
- Used on These Engines: Mercury
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.