Mercury Quicksilver Boat Trim Gauge 825290 | Volvo 2 Inch Black
This illuminated trim gauge features a domed lens, black bezel, black face, white needle, and white text with blue accents.
Measures approximately 2 1/4 Dia. across the face including bezel. Requires an approximate 2" Dia. cutout. Connects with (3) threaded bolts.
Mounting bracket included.
Set up for Mercury / Volvo engines.
- Part Manufacturer: Mercury Quicksilver
- Part Number: 825290
- Colors: Black
- Overall Dimensions: 2 1/4" Dia.
- Cutout: 2" Dia.
- Connections: (3) Threaded Bolts
- Set up for Mercury / Volvo Engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Sorry no, it doesn't. We don't currently have them, and they aren't something we can source or order.
99% sure it will, but you may want to check with a Mercury dealer to be certain.
We are almost certain it will, but you may want to check with a Mercury dealer to be sure. There seems to be a bit of gray area on pre-98 drives.
I have a 1988 60hp Mariner outboard 2 cycle gas , oil mixture serial # 0B371046. I am also checking on which tach may work also. Tx for your help.
When it comes to Mariner trim gauges, there can be some gray area, so recommend contacting a dealer directly on that. As far as the tach goes, pretty much any 12 pole tachomter will do the trick. Most everything we have that is 7000 RPM will be a 12 pole, but you'd want to check the ad to be sure. Here is a link to the tachometers: