
Rinker Boat Console Panel 238929 | Charcoal Plastic
Boat part number 1052053 is a new console panel from Rinker Boats, part number 238929 .
made for Rinker Boats
$439.95 MSRP: $576.33
GLS Stock #: 1052053-GG848
Only 2 left
Boat part number 1052053 is a new console panel from Rinker Boats, part number 238929 . Model / year unavailable.
This panel is constructed from textured charcoal-colored plastic with faux woodgrain accents. Measures approximately 32" W x 15" H x 27" D overall. Hosts (1) 11-pin male, (1) 12-pin female, (1) 4-pin female, (1) 3-pin female, (1) 2-pin female connections.
This dash panel features (2) pre-installed Faria gauges. Each of these clear halogen illuminated gauges feature a silver colored bezel, domed lens, gray face with black trim, white and black lettering and numerals, with red needles.
This panel features the following gauges:
This panel is constructed from textured charcoal-colored plastic with faux woodgrain accents. Measures approximately 32" W x 15" H x 27" D overall. Hosts (1) 11-pin male, (1) 12-pin female, (1) 4-pin female, (1) 3-pin female, (1) 2-pin female connections.
This dash panel features (2) pre-installed Faria gauges. Each of these clear halogen illuminated gauges feature a silver colored bezel, domed lens, gray face with black trim, white and black lettering and numerals, with red needles.
This panel features the following gauges:
- (1) Fuel / Volt Multifunction
- (1) 7000 RPM Tachometer | Set up for 4/6/8 Cylinder and 10/12 Pole Engines
- (1) Ritchie Compass
- (1) On/Off "Court Lts"
- (1) On/Off "Floor Lts"
- (1) On/Off "Int Lts"
- (2) On/Off "ACC"
- (1) On/Off "Docking Lts"
- (1) On/Off/On "Nav Anc"
- (1) Momentary On/Off "Horn"
- (1) 3 3/8" Dia. (Gauge)
- (1) 2" Dia. (Gauge)
- (1) 3 3/4" Dia. (Cupholder)
- (1) 7 1/4" W x 2" H (Rectangular)
- Boat Manufacturer: Rinker
- Model / Year: Unavailable
- Part Number: 238939
- Material: Textured Plastic
- Color: Charcoal Gray
- Overall Dimensions: 32" W x 15" H x 27" D
- Connections: (1) 11-Pin Male | (1) 12-Pin Female | (1) 4-Pin Female | (1) 3-Pin Female | (1) 2-Pin Female
- Mounts: (5) 1/4" Dia. x 1 1/4" L Threaded Bolts
- Set up for 4/6/8 Cylinder and 10/12 Pole Engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Will this fit a tinker captive. 209. 1994 model
Question by: Garry on Jun 12, 2021, 8:36 PM
Hi Garry,
I cannot look up and cross reference. The best way to decipher fitment will be to measure and compare. If you have any further questions, feel free to contact back. Thanks!
-
Jake
I cannot look up and cross reference. The best way to decipher fitment will be to measure and compare. If you have any further questions, feel free to contact back. Thanks!
-
Jake
Answer by: Jake Doro on Jun 13, 2021, 9:54 AM