Shields 368 Series 1/2 Inch ID Type A1-15 Low Permeation Boat Fuel Hose (FT)
Low permeation marine fuel hose has a plastic barrier veneer with an NBR outer layer tube to limit permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/UV resistant.
This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends). It meets USCG Type A1 15 requirements for pleasure boats and meets SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA/CE type accepted standards. Temperature range: -20°F to 212°F. Can Easily be bent into Tight Radius.Use with ABYC compliant fittings. Made in the USA.
Sold by the running linear foot. Simply enter the number of feet desired in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Brand: Shields Marine
- Part#: 0403090
- Series: 368
- Color: Black
- Type: A1-15
- ID: 1/2"
- OD: approx. 13/16"
- Length: Sold by the Foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included. Hardware not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.