Nitro Boat Raised Emblem Decal 137081 | Z-9 Black / Red Sticker - All Questions
Nitro Boat Raised Emblem Decal 137081 | Z-9 Black / Red Sticker
$14.95 MSRP: $20.18
SKU
8102763
Do u have port side too or just starboard because there reverse on the z9 and nitro thanks
Question by: Scott Langanke on Feb 18, 2020, 6:54 PM
Hi Scott,
Thank you for your interest in Great Lakes Skipper. This is all I have at the moment for z-9 decals. It is always worth checking back, as we do get new inventory in daily. If you have any further questions, feel free to contact back.
-
Jake
Thank you for your interest in Great Lakes Skipper. This is all I have at the moment for z-9 decals. It is always worth checking back, as we do get new inventory in daily. If you have any further questions, feel free to contact back.
-
Jake
Answer by: Jake Doro on Feb 19, 2020, 8:55 AM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Im looking for replacement for my Z8 nitro in black letters. my boat was wrapped so when the wrap was removed it came off.
Question by: David Chapman on Apr 14, 2023, 10:30 AM
Hello David,
Unfortunately, we do not currently have them, and they are not something we can source or order. The only Triton decals we can offer at this time are shown here:
link: https://www.greatlakesskipper.com/search/?q=nitro+decal
Gene
Unfortunately, we do not currently have them, and they are not something we can source or order. The only Triton decals we can offer at this time are shown here:
link: https://www.greatlakesskipper.com/search/?q=nitro+decal
Gene
Answer by: Admin on Apr 14, 2023, 10:54 AM
Do you have the Z8 decal like this for side of boat?
Question by: David Chapman on May 17, 2023, 12:41 PM
Hello David,
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on May 17, 2023, 1:30 PM