Trident Boat Heater Water Hose 130-0580 | Series 130 Flexible 5/8 ID (FT)
Boat part number 1101646 is a new, off the roll, increment of 5/8" ID, 130 series heater water hose from Trident, part number 130-0580 .
made for Marine Applications
$1.49 MSRP: $2.01
GLS Stock #: 1101646-GJ700
15 in stock
Boat part number 1101646 is a new, off the roll, increment of 5/8" ID, 130 series heater water hose from Trident, part number 130-0580 .
This flexible heater hose is constructed out of EPDM rubber with 2-ply spiral polyester reinforcement. Used for engine coolant water, A/C, and other mid-pressure water applications. Has an 5/8" ID and a bend radius of 2 1/2", per manufacturer.
Stamp on hose reads: TRIDENT HEATER HOSE 130-0580 5/8"
Sold in one foot increments. Simply enter the number of feet you desire in the quantity field. Lengths are sold as continuous feet.
Specifications:
This flexible heater hose is constructed out of EPDM rubber with 2-ply spiral polyester reinforcement. Used for engine coolant water, A/C, and other mid-pressure water applications. Has an 5/8" ID and a bend radius of 2 1/2", per manufacturer.
Stamp on hose reads: TRIDENT HEATER HOSE 130-0580 5/8"
Sold in one foot increments. Simply enter the number of feet you desire in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Part Manufacturer: Trident
- Series: 130
- Year: Unavailable
- Part Number: 130-0580
- Material: EPDM Rubber
- Color: Black
- Wire Reinforcement: Yes (2-ply spiral polyester)
- Temperature Range: -40°F to 212°F (-40°C to 100°C)
- Working Pressure: 90 PSI
- Inner Diameter: 5/8" ID
- Outer Diameter: 7/8" OD
- Bend Radius: 2 1/2"
- Length: Sold by the Foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.