Sea Ray Boat Tachometer / Speedometer Gauges | Faria (Set of 3)
Boat part number 1053083 is a new 3 piece gauge set from Sea Ray Boats, kit number unavailable.
made for Sea Ray Boats
$139.95 MSRP: $229.43
GLS Stock #: 1053083-FK532
Only 10 left
Boat part number 1053083 is a new 3 piece gauge set from Sea Ray Boats, kit number unavailable. Manufactured by Faria.
These clear halogen illuminated gauges feature a domed lens, black colored face, silver bezel, white lettering, numerals, with yellow accents, and yellow needles. Each features the "Sea Ray logo on the face.
Pigtail harness with 4-pin Metri female connection included.
This gauge set includes the following:
Speedometer Multifunction
Measures approximately 4 3/4" Dia. across the face (w/o bezel) and requires an approximate 4 1/4" Dia. cutout.
Tachometers
Measures approximately 3 3/4" Dia. across the face (w/o bezel) and requires an approximate 3 1/4" Dia. cutout.
NOTE: The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Sold as a set of 3 including eyebrow bezels.
Specifications:
All measurements are approximate.
Hardware and instruction / installation manual not included.
These clear halogen illuminated gauges feature a domed lens, black colored face, silver bezel, white lettering, numerals, with yellow accents, and yellow needles. Each features the "Sea Ray logo on the face.
Pigtail harness with 4-pin Metri female connection included.
This gauge set includes the following:
- (2) 9000 Tachometer w/ Systems Check: GS0062A
- (1) 65 Speedometer / Fuel / Volt Multifunction: TCC063A
Speedometer Multifunction
Measures approximately 4 3/4" Dia. across the face (w/o bezel) and requires an approximate 4 1/4" Dia. cutout.
Tachometers
Measures approximately 3 3/4" Dia. across the face (w/o bezel) and requires an approximate 3 1/4" Dia. cutout.
NOTE: The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Sold as a set of 3 including eyebrow bezels.
Specifications:
- Boat Manufacturer: Sea Ray Boats
- Year / Model: Unavailable
- Part Number: Unavailable
- Part Manufacturer: Faria
- Part Number: Unavailable
- Colors: Silver | Black
- Overall Dimensions: 4 3/4" Dia. (Speedometer) | 3 3/4" Dia. (Tachometers)
- Cutouts: 4 1/4" Dia. (Speedometer) | 3 1/4" Dia. (tachometers)
- Connection: (1) 4-Pin Metri Female
All measurements are approximate.
Hardware and instruction / installation manual not included.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Will this work on 1998 Sea Ray 280 bowrider with twin mercruiser engines
Question by: Andres on May 11, 2023, 10:52 AM
Hello Andres,
Sorry, no. The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Gene
Sorry, no. The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Gene
Answer by: Admin on May 11, 2023, 1:03 PM
Hi, is this gauge set is suitable for twin engine volvo penta 5.7gxi ?
Question by: Mesrur ertenu on Mar 30, 2023, 1:27 PM
Hello,
Sorry for the delay in getting back to you. The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Gene
Sorry for the delay in getting back to you. The tachometers were custom made for Sea Ray and only work with Weber engines used on jet drive Sea Ray boats.
Gene
Answer by: Admin on Mar 31, 2023, 10:31 AM
Are the instructions for the set suitable for me to use this set on my 22' Hurricane Typhoon deck boat, running a 200HP Evinrude 2-stroke. My guages have been literally destroyed by the sun. (My fault).
Question by: Joseph Williams Sr on Sep 25, 2022, 4:24 PM
Hello Joseph,
I'm sorry, but these came to us from Sea Ray with no instructions, so we aren't able to cross reference them to specific motors. However if you contact either a Sea Ray dealer, or Faria directly, they should be able to tell you.
Gene
I'm sorry, but these came to us from Sea Ray with no instructions, so we aren't able to cross reference them to specific motors. However if you contact either a Sea Ray dealer, or Faria directly, they should be able to tell you.
Gene
Answer by: Admin on Sep 26, 2022, 9:13 AM
Will this part work for a 1988 Sea Ray 34 ft Sea Ray if you
Question by: John Grantham on Jan 2, 2022, 1:46 PM
Hello John,
Thank you for your interest in Great Lakes Skipper. Yes these will work on your model. If you have any other questions please be sure to contact back.
Ethan
Thank you for your interest in Great Lakes Skipper. Yes these will work on your model. If you have any other questions please be sure to contact back.
Ethan
Answer by: Ethan Doro on Jan 3, 2022, 10:38 AM
Will this gauge kit fit a 2005 240 Sundeck?
Question by: Jack Newsome on Jul 17, 2021, 10:53 AM
Hi Jack,
It would be worth checking your cutout sizes and the backside connections. As long as the cutout is the same, they will work regardless. If the connections are the same, it will make it very simple to install. If they are different, it will take a little extra thought while installing. Thanks!
-
Jake
It would be worth checking your cutout sizes and the backside connections. As long as the cutout is the same, they will work regardless. If the connections are the same, it will make it very simple to install. If they are different, it will take a little extra thought while installing. Thanks!
-
Jake
Answer by: Jake Doro on Jul 18, 2021, 9:50 AM