Faria Boat Trim Gauge GP7717A | Performance Mercury 2 Inch
Boat part number 1080351 is a new trim gauge from Faria, part number GP7717A .
made for Four Winns Boats
$44.95 MSRP: $58.88
GLS Stock #: 1080351-FG694
Only 8 left
Boat part number 1080351 is a new trim gauge from Faria, part number GP7717A . Commonly used on Four Winns Boats, but may be used on other boats.
This red halogen bulb illuminated trim gauge features a domed lens, silver colored bezel, white face, red needle, and black graphics. Measures approximately 2 1/4" Dia. across the face (including bezel) x 3 3/8" D overall. Requires an approximate 2" Dia. cutout and has (3) threaded bolt and (1) single spade male connections.
Mounting bracket NOT included.
Specifications:
This red halogen bulb illuminated trim gauge features a domed lens, silver colored bezel, white face, red needle, and black graphics. Measures approximately 2 1/4" Dia. across the face (including bezel) x 3 3/8" D overall. Requires an approximate 2" Dia. cutout and has (3) threaded bolt and (1) single spade male connections.
Mounting bracket NOT included.
Specifications:
- Boat Manufacturer: Four Winns
- Part Number: Unavailable
- Part Manufacturer: Faria
- Part Number: GP7717A
- Color: Silver / White
- Overall Dimensions: 2 1/4" Dia. x 3 3/8" D
- Cutout: 2" Dia.
- Connection: (3) Threaded, (1) Single Spade Male
- Set Up For: Mercury
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
I have a Legend Alpha 211 bass boat with a 2020 Mercury Pro XS 4-Stroke engine. I wanted to confirm this trim gauge can be used on my Mercury outboard.
Thank you,
Thank you,
Question by: Steve Cannon on Aug 15, 2022, 11:45 AM
Hello Steve,
Yes, it sure can. Please note though - we do not have the mounting brackets for this particular gauge.
Gene
Yes, it sure can. Please note though - we do not have the mounting brackets for this particular gauge.
Gene
Answer by: Admin on Aug 15, 2022, 12:29 PM
This looks like the same set up that is on the back of my 2007 Bayliner 175. Would it work?
Question by: RONNIE K MOLPUS on Jun 29, 2020, 9:20 AM
Hi Ronnie,
As long as the connections are the same, it should work out the same way. If it is different, it will still work, will just take some extra thought during install. If you have any further questions, feel free to contact back.
-
Jake
As long as the connections are the same, it should work out the same way. If it is different, it will still work, will just take some extra thought during install. If you have any further questions, feel free to contact back.
-
Jake
Answer by: Jake Doro on Jun 29, 2020, 11:39 AM