Garelick Boat Seat Pedestal 23069A | Millenium Swivel Slide 8 Inch
Boat part number 1029732 is a new EEz-In Millennium seat pedestal from Garelick, part number 23069A .
made for Custom Applications
$139.99 MSRP: $188.99
GLS Stock #: 1029732-XIN4106FB494
41 in stock
Boat part number 1029732 is a new EEz-In Millennium seat pedestal from Garelick, part number 23069A .
This seat pedestal is constructed out of heavy duty anodized aluminum with swivel and slide. Features left hand lever and positive lock spider that allows for 360° rotation. The seat mount has 6" of smooth fore and aft travel distance. It has a standard 5" x 12" mounting pattern and there are (6) mounting holes on the base.
Approximate Measurements:
Hardware and instruction / installation manual not included.
This seat pedestal is constructed out of heavy duty anodized aluminum with swivel and slide. Features left hand lever and positive lock spider that allows for 360° rotation. The seat mount has 6" of smooth fore and aft travel distance. It has a standard 5" x 12" mounting pattern and there are (6) mounting holes on the base.
Approximate Measurements:
- Seat Mount: 13" L x 8" W
- Pedestal Base: 9 1/4" Dia.
- Overall Height: 8" H
- Center to Center of Mounting Holes: 4 1/8"
- Mounting Hole diameter: 1/4"
- Part Manufacturer: Garelick
- Series: EEz-In Millenium
- Part Number: 23069A
- Material: Aluminum
- Color: Silver
- Mounting Pattern: 5" x 12"
- Mounts: (6) mounting holes
Hardware and instruction / installation manual not included.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
looking at the GARELICK BOAT SEAT PEDESTAL 23069A | MILLENIUM SWIVEL SLIDE 8 INCH is it possible can that it can be made height adjustable say with a (depending on the seat height itself) seat height from approximately starting at 11 to whatever is possible ? Thank
Question by: Brian DeMent on May 18, 2023, 9:36 AM
Hi Brian,
I'm afraid not. You could LOWER it maybe an inch or two by cutting down the post, but that's pretty much it. Sorry.
Gene
I'm afraid not. You could LOWER it maybe an inch or two by cutting down the post, but that's pretty much it. Sorry.
Gene
Answer by: Admin on May 18, 2023, 11:21 AM
What is the weight ?
Question by: Brian K. DeMent on May 18, 2023, 7:49 AM
Hello Brian,
It weighs about 9 lbs.
Gene
It weighs about 9 lbs.
Gene
Answer by: Admin on May 18, 2023, 11:09 AM
Can this post be shortened
Question by: Joe F. on Aug 15, 2022, 4:46 PM
Hi Joe,
You might be able to cut it down an inch or maybe two, but that's it.
Gene
You might be able to cut it down an inch or maybe two, but that's it.
Gene
Answer by: Admin on Aug 16, 2022, 8:22 AM
I need to know the distance between the base holes center-to-center.
Question by: Roy Williams on Mar 17, 2022, 1:16 PM
Hi Roy,
Those holes are 4 1/8" apart center on center.
Thank you,
Gene
Those holes are 4 1/8" apart center on center.
Thank you,
Gene
Answer by: Admin on Mar 17, 2022, 2:47 PM
Does this fit Todd cape cod chair?
Question by: Bill Howell on Jun 22, 2021, 6:01 PM
Hello Bill,
I'm afraid we can't say for sure. We aren't dealers and can't cross reference them, and don't have one of those chairs to check. If the chair has as standard 12" x 5" mounting pattern, than yes, it would fit.
Sorry we could not tell you more.
Gene
I'm afraid we can't say for sure. We aren't dealers and can't cross reference them, and don't have one of those chairs to check. If the chair has as standard 12" x 5" mounting pattern, than yes, it would fit.
Sorry we could not tell you more.
Gene
Answer by: Gene Warmuth on Jun 23, 2021, 7:48 AM