Larson Pontoon Boat Windshield LARS100-0039 | 30 1/8 Inch Escape 2000

Boat part number 1092585 is a new windscreen for Escape 2000 pontoon model Larson Boats, part number LARS100-0039 .
made for Larson Boats
GLS Stock #: 1092585-GA472
Only 1 left
Boat part number 1092585 is a new windscreen for Escape 2000 pontoon model Larson Boats, part number LARS100-0039 .

This windshield is constructed out of 3/16" thick smoke tinted plexiglass. It measures approximately 30 1/8" W x 9 1/4" H x 10 7/8" D overall. There are (4) 3/8" Dia. mounting holes across the bottom.

Note: Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.


  • Boat Manufacturer: Larson Boats
  • Model: Escape 2000
  • Part Number: LARS100-0039
  • Material: Plexiglass
  • Color: Smoke
  • Inside Front Width: 24 5/8"
  • Side Width: 10 7/8"
  • Height: 9 1/4"
  • Back Width: 30 1/8"
  • Mounts: (4) 3/8" Dia. Holes

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

Product Questions

Will this fit a 2003 Forest River Millenium Odyssey 2503 pontoon boat? (We only have 3 mounting holes, but speculating I could drill into the console.)
Question by: Norman Gerschutz on Feb 21, 2023, 8:30 AM
Hello Norman,

I'm afraid we are not able to cross reference the windshield to specific boats. You could try contacting a dealer and give them that 100-0039 Larson part number. More likely than nnot though, you'd need to measure where you'd be mounting it to see if the dimensions work for you.

If you look at the dimensional photo, That "a" dimension of 24 5/8" is the critical one. It is center to center of each sides radius. If you can find something that size, and curve, chances are good it will work for you.

Sorry we could not help more.

Answer by: Admin on Feb 21, 2023, 9:16 AM
How thick is the plexiglass? And, can the windshield be heated up to be reformed to match my console?
Question by: Craig Wadzink on Jul 26, 2022, 10:26 AM
Hi Craig,

It is about 3/16" thick, but we aren't to sure about how much you can form it by heating it up. We've never done that. Sorry.

Answer by: Admin on Jul 26, 2022, 1:49 PM
Will this item fit my 2001 Larson Escape 233 deck boat?
Question by: Sarah DeBruin on Jul 7, 2022, 12:35 AM
Hello Sarah,

I'm very sorry, but we are not able to cross reference the windscreen to specific boats. You'd pretty much need to just go by the measurements in the ad.

Answer by: Admin on Jul 7, 2022, 11:34 AM