Avalon Boat Pinstripe Tape 124187 | Two Stripes Burgundy 5 1/2 Inch x 150 Ft - All Questions
Avalon Boat Pinstripe Tape 124187 | Two Stripes Burgundy 5 1/2 Inch x 150 Ft
SKU
8800046
I would like to know if the surface of the sticker is glossy or matte. Thanks
Question by: ALVARO DE LUISA on Apr 1, 2020, 3:31 AM
Hi Alvaro,
Thank you for your interest in Great Lakes Skipper. This product will be glossy. If you have any further questions, feel free to contact back.
-
Jake
Thank you for your interest in Great Lakes Skipper. This product will be glossy. If you have any further questions, feel free to contact back.
-
Jake
Answer by: Jake Doro on Apr 2, 2020, 10:17 AM
Is this pinstripe still available and where is it being shipped from?
Question by: Joe Davis on Feb 28, 2021, 8:25 AM
Hi Joe,
Yes, we have (7) rolls remaining, and they ship out of Racine, WI - zip 53404.
Thank you.
Gene
Yes, we have (7) rolls remaining, and they ship out of Racine, WI - zip 53404.
Thank you.
Gene
Answer by: Gene Warmuth on Mar 1, 2021, 1:51 PM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Does this product come in different colors
Question by: Pat Murrell on Sep 3, 2021, 3:40 PM
Hi Pat,
This is the only color we have available in this pinstripe. I have attached a link below to view my entire selection:
https://www.greatlakesskipper.com/decals-pinstriping/boat-stripes-pinstriping
Jake
This is the only color we have available in this pinstripe. I have attached a link below to view my entire selection:
https://www.greatlakesskipper.com/decals-pinstriping/boat-stripes-pinstriping
Jake
Answer by: Jake Doro on Sep 5, 2021, 10:48 PM