Bayliner Boat Center Console Windshield 1754133 | 31 Inch 3 Piece
Boat part number 1029172 is a new glass center console boat windshield from Bayliner US Marine.
made for Bayliner Boats
$599.95 MSRP: $785.93
GLS Stock #: 1029172-MG361
Only 8 left
Boat part number 1029172 is a new glass center console boat windshield from Bayliner US Marine. Constructed from clear glass with off white aluminum frame and adjustable wings. Pre-wired for Deck Harness and Mast Light.
Specifications:
- Boat Manufacturer Bayliner US Marine
- Part Number: 1754133 (overall)
- Part Number: 1887860 (center window)
- Part Number: 1887861 (port / left wing)
- Part Number: 1887862 (starboard / right wing)
- Material(s): Glass, Aluminum
- Color(s): Off White
- Tint: Clear
- Overall Dimensions: 31" W x 19¼" D x 19" H
- Circumference: 66 1/2"
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Product Questions
I need the entire windshield for a 1989 Bayliner Capri Cuddy boat. During the winter, bad snowstorms crushed it. I need the whole set up. Do you have it in stock?
Question by: Annita Cline on Jul 16, 2023, 12:38 PM
Hello Annita,
Unfortunately, we don't currently show one specific to your Capri and it isn't something we can source/order.
Going back to '89, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your Capri and it isn't something we can source/order.
Going back to '89, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Jul 17, 2023, 8:09 AM
Looking to add this to a 26' Regulator Center Console. Description lists it at 19", but also 19" deep. Looks higher than deep, is that correct? Any way to determine the angle of the front glass?
Question by: Kurt Clason on Jan 23, 2023, 4:07 PM
Hi Kurt,
Yes, it is 19 - 19. Just an optical illusion on it looking taller. Unfortunately, we don't have any way to measure the angle - sorry.
Gene
Yes, it is 19 - 19. Just an optical illusion on it looking taller. Unfortunately, we don't have any way to measure the angle - sorry.
Gene
Answer by: Admin on Jan 24, 2023, 10:04 AM