Bayliner Boats Vinyl Decal | Silver / Teal 54 1/2 x 1 1/2 Inch (Pair) - All Questions
Bayliner Boats Vinyl Decal | Silver / Teal 54 1/2 x 1 1/2 Inch (Pair)
SKU
1002615
Are these the same stickers that come on the sides of a 1999 Bayliner Capri 2050 CX?
Question by: David on Feb 23, 2021, 5:09 PM
Hello David,
I'm afraid we don't know what specific boats they were used on. You see, we aren't dealers/distributors - we purchase overstock and excess marine accessories - and these came to us with no info. Sorry.
Gene
I'm afraid we don't know what specific boats they were used on. You see, we aren't dealers/distributors - we purchase overstock and excess marine accessories - and these came to us with no info. Sorry.
Gene
Answer by: Gene Warmuth on Feb 25, 2021, 8:14 AM
GLS,
Are the letters raised or flush?
Are the letters raised or flush?
Question by: KJ on Apr 8, 2021, 10:18 PM
Hello JK,
They are just flat vinyl. Anything that we have that is filled, hard plastic - anything but flat vinyl - will say raised in the ad.
Gene
They are just flat vinyl. Anything that we have that is filled, hard plastic - anything but flat vinyl - will say raised in the ad.
Gene
Answer by: Gene Warmuth on Apr 9, 2021, 11:49 AM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Are these raised letters like the original? If not, do you have the raised letter version?
Question by: Larry on Jun 12, 2022, 12:15 PM
Hi Larry,
Sorry no, these are not the raised decals, and unfortunately, we don't currently have the same ones raised. They aren't something we can source or order. All the Bayliner raised graphics we have are shown here:
link: https://www.greatlakesskipper.com/search/?q=bayliner+raised
Gene
Sorry no, these are not the raised decals, and unfortunately, we don't currently have the same ones raised. They aren't something we can source or order. All the Bayliner raised graphics we have are shown here:
link: https://www.greatlakesskipper.com/search/?q=bayliner+raised
Gene
Answer by: Admin on Jun 13, 2022, 8:42 AM
can I get matching decal striping tape in a roll to match your part number 1002615, bayliner decals in Teal and Silver
Question by: Jon Shields on Aug 21, 2022, 9:06 AM
Hello Jon,
I'm very sorry, but we do not currently have the matching stripe, and it isn't something we can source or order.
Gene
I'm very sorry, but we do not currently have the matching stripe, and it isn't something we can source or order.
Gene
Answer by: Admin on Aug 21, 2022, 10:48 AM