Boat Rod Holder | Rocket Launcher 4 Tube 48 1/4 Inch Aluminum
Boat part number 1093738 is a new rocket launcher style fishing rod holder rack, part manufacturer unavailable.
made for Custom Applications
$349.95 MSRP: $472.43
GLS Stock #: 1093738-GF977
Only 10 left
Boat part number 1093738 is a new rocket launcher style fishing rod holder rack, part manufacturer unavailable.
This rod holder is constructed out of aluminum with a polished finish and has (4) tubes. Each tube is approximately 2 1/8" Dia. x 10" H overall with an inside diameter of approximately 1 1/4" ID. It measures approximately 48 1/4" W x 11 3/4" H x 10 7/8" D overall and has (6) 1/4" Dia. countersunk mounting holes.
Specifications:
This rod holder is constructed out of aluminum with a polished finish and has (4) tubes. Each tube is approximately 2 1/8" Dia. x 10" H overall with an inside diameter of approximately 1 1/4" ID. It measures approximately 48 1/4" W x 11 3/4" H x 10 7/8" D overall and has (6) 1/4" Dia. countersunk mounting holes.
Specifications:
- Part Manufacturer: Unavailable
- Part Number: Unavailable
- Material: Aluminum
- Color: Silver
- Finish: Polished
- Tube Size: 2 1/8" Dia. x 10" H
- Tube Inner Diameter: 1 1/4" ID
- Overall Dimensions: 48 1/4" W x 11 3/4" H x 10 7/8" D
- Mounts: (6) 1/4" Dia. countersunk mounting holes
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
does this come with counterside mounting plate, and screws/nuts? what is the return policy? Thx
Question by: DANIEL FUCCILLO on Mar 1, 2023, 9:39 AM
Hello Daniel,
I'm afraid no mounting plates or hardware is included. These came to us exactly as shown in the photos, and that is all we can offer. You can return within 30 days of purchase as long as it has not been altered in any way. There is an 8% restock for a refund which is waived if you can use a store credit (good for two years) Either way though, you'd be responsible for the shipping.
Thank you!
Gene
I'm afraid no mounting plates or hardware is included. These came to us exactly as shown in the photos, and that is all we can offer. You can return within 30 days of purchase as long as it has not been altered in any way. There is an 8% restock for a refund which is waived if you can use a store credit (good for two years) Either way though, you'd be responsible for the shipping.
Thank you!
Gene
Answer by: Admin on Mar 1, 2023, 11:38 AM
What is the distance between the tubes and are the tubes at an angel or straight up and down?
Question by: Lisa Metcalfe on Aug 11, 2022, 12:46 PM
Hello Lisa,
These are stored at a fulfilment location, so we cannot get additional measurements on them. However, going by that 48 1/4" measurement, I'd estimate the rod holders should be about 14 1/2" apart center on center.
The holders ARE mounted on an angle - somewhere between 10 and 30 degrees.
Gene
These are stored at a fulfilment location, so we cannot get additional measurements on them. However, going by that 48 1/4" measurement, I'd estimate the rod holders should be about 14 1/2" apart center on center.
The holders ARE mounted on an angle - somewhere between 10 and 30 degrees.
Gene
Answer by: Admin on Aug 11, 2022, 12:54 PM
Does this rod holder fit on top of a 2120 Parker pilot
Question by: Mike Sacca on Feb 23, 2022, 9:51 AM
Hello Mike,
I'm sorry, but we do not know. We are not dealers, and cannot cross reference them to specific boats. You'd pretty much need to go by the measurements in the ad.
Gene
I'm sorry, but we do not know. We are not dealers, and cannot cross reference them to specific boats. You'd pretty much need to go by the measurements in the ad.
Gene
Answer by: Admin on Feb 23, 2022, 10:58 AM