BRP Evinrude Boat Speedometer Gauge 765467 | Icon Basic 3 1/4 Inch
Boat part number 1081795 is a new Icon Basic Series 50 MPH (80 Km/h) speedometer gauge with systems check from BRP / Evinrude Johnson, part number 765467
made for Marine Applications
$124.95 MSRP: $168.68
GLS Stock #: 1081795-AY664
Only 2 left
Boat part number 1081795 is a new Icon Basic Series 50 MPH (80 Km/h) speedometer gauge with systems check from BRP / Evinrude Johnson, part number 765467 . Manufactured by Faria, part number SG0017 . Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibility.
This speedometer gauge features a domed lens, silver colored bezel, white face, transparent orange needle, and black lettering and graphics.
Manufacturer calls this a 5" gauge, however, we measure it to be approximately 3 3/4" across the face (including bezel) x 4 1/2" D overall. Requires an approximate 3 1/4" Dia. cutout. Has (2) threaded bolts, (1) 8-pin male deutsch, and (1) 6-pin female deutsch connections (connectors not included).
Mounting bracket included. Pigtail connector / harness not included.
Manufacturer tag reads: BRP#765467 ICON Basic 5" 50 MPH Spdo SG0017
Specifications:
This speedometer gauge features a domed lens, silver colored bezel, white face, transparent orange needle, and black lettering and graphics.
Manufacturer calls this a 5" gauge, however, we measure it to be approximately 3 3/4" across the face (including bezel) x 4 1/2" D overall. Requires an approximate 3 1/4" Dia. cutout. Has (2) threaded bolts, (1) 8-pin male deutsch, and (1) 6-pin female deutsch connections (connectors not included).
Mounting bracket included. Pigtail connector / harness not included.
Manufacturer tag reads: BRP#765467 ICON Basic 5" 50 MPH Spdo SG0017
Specifications:
- Engine Manufacturer: BRP / OMC / Evinrude Johnson
- Series: Icon Basic
- Part Number: 765467
- Part Manufacturer: Faria
- Part Number: SG0017
- Color: Silver / White
- Manufacturer Size: 5"
- Overall Dimensions: 3 3/4" Dia. x 4 1/2" D
- Cutout: 3 1/4" Dia.
- Connection: (2) threaded bolts, (1) 8-pin male deutsch, (1) 6-pin female deutsch
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Product Questions
I had just bought this speedo, what I did not see when I sent the order was the 2 pig tails were not included. I had a electrical wire issue in my older Lund, bought a low hour 2011 Evinrude 150 H.O. I went to all new Evinrude engine harness #176340 volt, trim fuel tach and your speedo I have no help from our Evinrude dealer as trying to figure this out. The wire harness they sent is not the right one, wrongs gauge end plugs,
CAN YOU HELP ME OUT
BEST TO CALL ME DIRECT 605-390-9001 jim
CAN YOU HELP ME OUT
BEST TO CALL ME DIRECT 605-390-9001 jim
Question by: JIM GLINES on May 18, 2021, 9:38 AM
Hello Jim,
We do have a deutsch connector that will work with that gauge (see link below) but you'd need to move the wires inside it around a bit (it's really self explanatory once you have one in your hand. You should only need the one 12 pin/8 wire connector. That other 6 pin connection on the back isn't typically used. What we can't tell you though is the wiring sequence. We aren't BRP dealers/distributors and these came with no instructions or diagrams.
Here is a link to that connector:
link: https://www.greatlakesskipper.com/deutsch-12-pin-8-wire-female-boat-gauge-connector
Hope this helps!
Gene
We do have a deutsch connector that will work with that gauge (see link below) but you'd need to move the wires inside it around a bit (it's really self explanatory once you have one in your hand. You should only need the one 12 pin/8 wire connector. That other 6 pin connection on the back isn't typically used. What we can't tell you though is the wiring sequence. We aren't BRP dealers/distributors and these came with no instructions or diagrams.
Here is a link to that connector:
link: https://www.greatlakesskipper.com/deutsch-12-pin-8-wire-female-boat-gauge-connector
Hope this helps!
Gene
Answer by: Gene Warmuth on May 19, 2021, 11:10 AM