Bryant Boat Steering Wheel w/ Hub SW0155 | Spoke 13 3/4 Inch Black/Silver
GLS stock number 1059152 is a new, out of the box, boat steering wheel with hub from Bryant Boats, part number SW0155.
made for Bryant Boats
$139.95 MSRP: $188.93
GLS Stock #: 1059152-GE635
Only 2 left
GLS stock number 1059152 is a new, out of the box, boat steering wheel with hub from Bryant Boats, part number SW0155. May also be used on others. Features brushed silver aluminum and polished chrome plated spokes with textured vinyl grip for control and comfort.
This attractive wheel measures approximately 13 3/4" in diameter. Also has an approximate 3/4" dia. tapered hole with three approximate 1/4" wide keyways. Center cap included.
Specifications:
- Boat manufacturer: Bryant
- Part number: SW0155
- Overall Dimensions: 13 3/4" OD x 3 1/2" Deep
- Colors: Black / Silver
- Spokes: Brushed Silver Aluminum and polished chrome
- Center Cap and Hub included
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Would this fit a Bryant 210, 2008?
Question by: Orla Moore on Feb 13, 2023, 7:01 PM
Hello Orla,
While we aren't able to cross reference steering wheels to specific boats, chances are about 99% it will but the only way we know for sure is if you remove your old wheel and hub from your steering helm shaft and see if that helm has a key way or splined tip. A key way has 1, 2 or 3 slots on it while a splined tip would have 15 splines and look like a prop shaft.
If you look at the back side view of this wheel, you'll see three slots in the hub - that is a keyway mount.
Hope this helps!
Gene
While we aren't able to cross reference steering wheels to specific boats, chances are about 99% it will but the only way we know for sure is if you remove your old wheel and hub from your steering helm shaft and see if that helm has a key way or splined tip. A key way has 1, 2 or 3 slots on it while a splined tip would have 15 splines and look like a prop shaft.
If you look at the back side view of this wheel, you'll see three slots in the hub - that is a keyway mount.
Hope this helps!
Gene
Answer by: Admin on Feb 14, 2023, 8:13 AM
Will this fit a 1996 Bryant 212?
Question by: Daren on Jun 5, 2021, 4:48 PM
Hi Daren,
As long as you have a 3/4 inch tapered keyway (incredibly common) it will accommodate. Thanks!
-
Jake
As long as you have a 3/4 inch tapered keyway (incredibly common) it will accommodate. Thanks!
-
Jake
Answer by: Jake Doro on Jun 5, 2021, 5:03 PM