Faria Boat Depth Finder Gauge DS0176A | Digital 2 Inch Silver Black
This digital display depth finder gauge features a silver colored bezel, flat black / digital face, and white graphics. Measures approximately 2 1/4" Dia. across the face (including bezel) x 3 1/4" D overall and requires an approximate 2" Dia. cutout. Features up/down and ON/OFF Mode push buttons. Has (2) raw wire leads and (1) 2-pin male connections.
Mounting bracket included. Transducer not included.
- Part Manufacturer: Faria
- Part Number: DS0176A
- Color: Silver / Black
- Cutout Dimensions: 2" Dia.
- Overall Dimensions: 2 1/4" Dia. x 3 1/4" D
- Connections: (2) Single Male Pin, (1) 2-Pin Male
- Operates at 235 kHz frequency
- Depth Range: 1- 61 meters (3 -199 feet)
- Deep and Shallow water alarms
- Programmable Keel off-set
- Automatic Gain control
- Back lighting for maximum night vision
- Easy to install!
- Dual Temp Depth Sounder displays Outside Air temperatures and Water temperatures from 32° F to 200°F.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Those 3500's have become next to impossible to find I'm afraid. We'll see a couple from time to time, but that's it. They aren't something we can source or order. Since we aren't Lowrance dealers, we don't know what (if any) direct replacement there is. Sorry.
Honestly not sure. The manual doesn't say anything about that. About all we can suggest is to contact Faria directly. Sorry.
Sorry no transducer is included. It uses a 245kz, two pin transducer that I think you can get from Faria. It fits through the front of the dash in a 2" hole and has a mounting bracket on the back that attaches to it.
I'm sorry, but we have no way to cross reference the unit to specific boats. If your dash has a 2" diameter opening, and you have a 235hz transducer with 2-pin connector, we know of no reason it wouldn't work.
I'm afraid we do not know. We aren't Lowrance dealers, and don't know the specs of your depth finder or transducer. The Faria depth finder Operates at 235 kHz frequency, but you'd need to check with Lowrance to see if it is compatible.