Flair-It Boat Compression Fitting 26800 | Elbow 1/2 x 1/2 Inch OD
Boat part number 1041416 is a new 90° degree elbow compression fitting from Flair-It, part number 26800 .
made for Custom Applications
$2.95 MSRP: $8.03
GLS Stock #: 1041416-BV554
39 in stock
Boat part number 1041416 is a new 90° degree elbow compression fitting from Flair-It, part number 26800 .
Flair-It Compression Fittings been referred to as the original Push-On fitting—the installer simply pushes the tubing onto and over the cone shaped barb on the Flair-It fitting. No other plumbing fitting in the US can boast of its simplicity, practicality and integrity like Flair-It—it just works.
This fitting is constructed out of white cross-linked polyethylene (PEX) and measures approximately 2 1/8" L x 1" H x 2 1/8" D overall. Each end connects with a 1/2" OD barbed hose connection with a compression fitting end. For use with hot and cold water, per manufacturer.
Both ends carry the etchings: PEX THC 1/2 NSF-PW FI AC
Specifications:
Flair-It Compression Fittings been referred to as the original Push-On fitting—the installer simply pushes the tubing onto and over the cone shaped barb on the Flair-It fitting. No other plumbing fitting in the US can boast of its simplicity, practicality and integrity like Flair-It—it just works.
This fitting is constructed out of white cross-linked polyethylene (PEX) and measures approximately 2 1/8" L x 1" H x 2 1/8" D overall. Each end connects with a 1/2" OD barbed hose connection with a compression fitting end. For use with hot and cold water, per manufacturer.
Both ends carry the etchings: PEX THC 1/2 NSF-PW FI AC
Specifications:
- Boat Manufacturer: Flair-It
- Part Number: 26800
- Material: Cross-Linked Polyethylene (Plastic)
- Color: White
- Hose Connections: 1/2" OD Barbed
- Overall Dimensions: 2 1/8" L x 1" H x 2 1/8" D
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.