Florida Boat Fuel Gas Tank FMT-75A-RKB | 75 Gallon 68 Inch Aluminum
This fuel tank is constructed out of aluminum and has a capacity of approximately 75 gallons per manufacturer. It measures approximately 68" L x 39" W x 8" H overall, with a height of 11" H including fittings. Features (1) pre-installed sending unit with a standard range of 35 - 240 ohms.
Has the following connections:
- (1) 5/8" Dia. barbed vent
- (1) 2" Dia. barbed
- (1) 2-pin male Deutsch
- Part Manufacturer: Florida Marine Tanks
- Part Number: FMT-75A-RKB
- Material: Aluminum
- Color: Silver
- Capacity: 75 gallons
- Wall Thickness: 0.125"
- Fuel Type: Gasoline / Diesel
- Overall Dimensions: 68" L x 39" W x 8" H (11" H w/ fittings)
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Ideally you'd want one that is 7" - 7 1/2" long but the closest we have right now is 6 1/2". It's not a huge deal, it's just that with that shorter sending unit, you'd always have more fuel in the tank than the gauge reads.
The one that is in the tank is a 30-240 ohm - the standard ohm range for sending units - and that is the same as this sender. If you aren't comfortable with the shorter sender, it wouldn't be difficult to find one a bit longer anywhere around the web. Just be sure it's 30-240 ohm.
Hope this helps!