Glastron GS 180 / 205 Glitter Gold / Aquamarine / Silver Hull Sphere Boat Decals (Set of 5) 05726613 - All Questions
Glastron GS 180 / 205 Glitter Gold / Aquamarine / Silver Hull Sphere Boat Decals (Set of 5) 05726613
SKU
1032553
Can you get this same pattern in different colors
Question by: Randy Robideaux on Mar 26, 2021, 7:51 AM
Hi Randy,
This is the only version of this decal I have available at the moment. There is always a chance I could get them in the future however. if you have any further questions, feel free to contact back. Thanks!
-
Jake
This is the only version of this decal I have available at the moment. There is always a chance I could get them in the future however. if you have any further questions, feel free to contact back. Thanks!
-
Jake
Answer by: Jake Doro on Mar 26, 2021, 10:37 AM
Will this decal work on gs180sf model
Question by: Paul west on Apr 24, 2021, 9:12 AM
Hello Paul,
This decal is specific to the 180 model, we would recommend confirming measurements to assure it is the correct dimensions.
Ethan
This decal is specific to the 180 model, we would recommend confirming measurements to assure it is the correct dimensions.
Ethan
Answer by: Ethan Doro on Apr 25, 2021, 10:02 AM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
I'm looking for the glastron sphere hull graphic in blue silver and grey any leads on those . The aqua and gold you have just isn't going to work . Thanks don johnson
Question by: Don on Jun 28, 2021, 12:23 PM
Hi Don,
Unfortunately all we have it in right now is that aqua color and they aren't something we can source or order. Not really sure where you'd go for them. We got them as closeouts from Glastron I think a few years back.
Gene
Unfortunately all we have it in right now is that aqua color and they aren't something we can source or order. Not really sure where you'd go for them. We got them as closeouts from Glastron I think a few years back.
Gene
Answer by: Gene Warmuth on Jun 28, 2021, 12:40 PM
Do you have these decals in blue and gold?
Question by: Stacy Hutchins on May 28, 2022, 6:09 PM
Hello Stacy,
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on May 29, 2022, 10:56 AM
Will these work on a 2000 GS 249 Glastron?
Question by: Tom on Jun 5, 2022, 3:25 PM
Hello Tom,
I'm sorry, but we do not know. We are not able to cross reference them to specific boats. You'd need to just go by the photos and measurements in the ad.
Gene
I'm sorry, but we do not know. We are not able to cross reference them to specific boats. You'd need to just go by the photos and measurements in the ad.
Gene
Answer by: Admin on Jun 6, 2022, 8:58 AM