Lund Boat Gauge Dash Panel 2109115 | 14 3/8 x 8 5/8 Inch Black Silver
Boat part number 8302712 is a new gauge dash panel from Lund, part number 2109115 .
made for Lund Boats
$299.95 MSRP: $404.93
GLS Stock #: 8302712-GC742
Only 1 left
Boat part number 8302712 is a new gauge dash panel from Lund, part number 2109115 .
This panel is constructed out of black marine grade plastic with a gray plastic accent panel. Measuring approximately 14 3/8" L x 8 5/8" H x 7 3/4" D overall. Has (4) 1/8" mounting holes. This panel features (4) pre-installed custom Faria gauges. These clear halogen illuminated bulb gauges feature silver bezels, domed lens, black faces, white lettering, numerals, accents, and red needles.
The pre-installed gauges are as follows:
This panel is constructed out of black marine grade plastic with a gray plastic accent panel. Measuring approximately 14 3/8" L x 8 5/8" H x 7 3/4" D overall. Has (4) 1/8" mounting holes. This panel features (4) pre-installed custom Faria gauges. These clear halogen illuminated bulb gauges feature silver bezels, domed lens, black faces, white lettering, numerals, accents, and red needles.
The pre-installed gauges are as follows:
- 7000 RPM Tachometer | TCC004C | Has (1) 4-Spade female and (1) 4-Spade male deutsch connections | Set up for 4/6/8 Cylinders or 4/6/8/10/12 Outboard Poles.
- 65 MPH Speedometer | SEK002B | Has pitot connection
- Volt Gauge | VBC003B | Has (1) 2-Spade deutsch connection
- Fuel Gauge | GBC015B | Has (1) 4-Spade deutsch connection
- (1) 12V Power Outlet
- (2) Push Button Breaker
- (1) Red Push Button Horn
- Boat Manufacturer: Lund
- Part Number: 2109115
- Materials: Plastic
- Color: Black / Gray
- Overall Dimensions: 14 3/8" L x 8 5/8" H x 7 3/4" D
- Mounts: (4) 1/8" mounting holes
- Connections: (1) 5-Pin female and (1) 7-Spade male
- Set up for 4/6/8 Cylinders or 4/6/8/10/12 Outboard Poles
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.