Lund Boat Seat Brand Decal 1988349 | 10 Inch Black Red - All Questions
Lund Boat Seat Brand Decal 1988349 | 10 Inch Black Red
SKU
8303557
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
This is an iron on decal. How do I install this iron on decal on the back of the boat seat?
Question by: Jim Gray on Apr 13, 2023, 12:02 PM
Hi Jim,
From what we understand, it works the same as a transfer. Basically just use an iron and (I think) parchment paper. You might want to go to youtube to check out some videos.
Gene
From what we understand, it works the same as a transfer. Basically just use an iron and (I think) parchment paper. You might want to go to youtube to check out some videos.
Gene
Answer by: Admin on Apr 13, 2023, 12:39 PM
Do you have in silver?
Question by: Marcel cantin on Jun 26, 2023, 7:16 PM
Hello Marcel,
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not at this time, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on Jun 27, 2023, 10:31 AM
Is this decal available
in Silver with black shadow approx 10"
in Silver with black shadow approx 10"
Question by: Dana Carstensen on Nov 14, 2023, 1:19 PM
Hello Dana,
Unfortunately not. Closest I found is this silver one, but it's larger:
link: https://www.greatlakesskipper.com/lund-boat-raised-emblem-logo-decal-2259027-silver-24-1-4-x-5-inch
Gene
Unfortunately not. Closest I found is this silver one, but it's larger:
link: https://www.greatlakesskipper.com/lund-boat-raised-emblem-logo-decal-2259027-silver-24-1-4-x-5-inch
Gene
Answer by: Admin on Nov 14, 2023, 2:28 PM