Marine Boat Fuel Line 5/16 Inch Gates Corp 4219-5061 Type B1 Gas / Diesel (Ft)
GLS stock number 1030608 is a new, out of the box, section of 5/16" ID fuel hose manufactured by Gates Corp, part number 4219-5061. Commonly used by Cruisers Yachts. Provides flexible connections between rigid fuel distribution lines and the vessel engine. It can also be used in evaporative emission control systems and as a vent line. Hose reads: Gates 4219N 5/16" Marine Fuel Line USCG Type BI SAE J1527 NMMA Type Accepted. Made in the USA.
Sold by the foot. Simply enter the number of feet you desire in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Manufacturer: Gates Corp
- Part#: 4219-5061
- Vendor: Cruisers Yachts
- Part#: 275500548
- Color: Black
- Hose ID: 5/16"
- Hose OD: 5/8"
- Length: Sold by the Foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included. This product is cut to length and we cannot accept returns or cancellations on any cut to length product.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Product Questions
Absolutely. Here is a good explanation of B1 fuel link:
"This product is intended for non-enclosed spaces, like above deck outboard gasoline applications. A good example of how B1 fuel hose is used is for feeding your outboard(s) either from a portable tank or inside of the circular rigging tube that connects to your outboard from the primary fuel filter."
Hope this helps.
Gene
I'm sorry, but we do not know. We aren't dealers/distributors and have no way to cross reference fuel line to specific motors. All we can suggest is to contact a Mercury dealer.
Gene
Will this fit the fuel tank in a cruiser 2670 Holiday 1988
Thanks
I cannot look up and cross reference that information. The hose will either be 3/8 or 5/16, so it would be worth pulling it off and taking a quick measurement. If you have any further questions, feel free to contact back. Thanks!
-
Jake