MasterCraft Boat Graphic Decal 7581433 | OEM 2005 X-30 Yellow Orange - All Questions
MasterCraft Boat Graphic Decal 7581433 | OEM 2005 X-30 Yellow Orange
SKU
8400393
Good afternoon, is the Seaboard side available for this product?
Question by: Bruce Leach on Apr 11, 2021, 3:00 PM
Hi Bruce,
This is the only side I have available for this decal. If you have any further questions, feel free to contact back. Thanks!
-
Jake
This is the only side I have available for this decal. If you have any further questions, feel free to contact back. Thanks!
-
Jake
Answer by: Jake Doro on Apr 11, 2021, 7:33 PM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Hello - do you know the vinyl thickness, and is this design also available in any other color combination? many thanks
Question by: Bill on Jan 17, 2022, 7:17 PM
Hello Bill,
Unfortunately we do not have the specs on how think this vinyl is, but it is marine grade vinyl. We do not have this specific decal in any other colors.
Thank you and have a great day!
Ethan
Unfortunately we do not have the specs on how think this vinyl is, but it is marine grade vinyl. We do not have this specific decal in any other colors.
Thank you and have a great day!
Ethan
Answer by: Ethan Doro on Jan 18, 2022, 10:20 AM