Misty Harbor Pontoon Boat Logo Decals | Burgundy Stickers (Pair) - All Questions
Misty Harbor Pontoon Boat Logo Decals | Burgundy Stickers (Pair)
SKU
1041855
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Are you able to tell me if Misty Harbor decal set GLS STOCK #: 1061189-FB493 is a matching Maroon tone to this GLS STOCK #: 1041855-FE563? I understand one is described as a wine and this a burgundy but the background on one picture is also a darker gray than white on the other. I'm sure this isn't the easiest answer so thank you in advance!
Question by: Brent W on Feb 18, 2022, 8:56 AM
Hi Brent,
These are stored at different locations, so I'm afraid it's not like we can put them side x side to compare. However, typically the metallic burgundy of the "misty harbor" decal would be a shade lighter than the "wine" of the "stripes."
You could try checking with a dealer and give them that 001627-WINE part number to see if they feel it is close to "metallic burgundy." Unfortunately no part numbers came with that decal.
Gene
These are stored at different locations, so I'm afraid it's not like we can put them side x side to compare. However, typically the metallic burgundy of the "misty harbor" decal would be a shade lighter than the "wine" of the "stripes."
You could try checking with a dealer and give them that 001627-WINE part number to see if they feel it is close to "metallic burgundy." Unfortunately no part numbers came with that decal.
Gene
Answer by: Admin on Feb 18, 2022, 10:22 AM