Nitro Boat Raised Decal 145857 | Z-7 White Black - All Questions
Nitro Boat Raised Decal 145857 | Z-7 White Black
SKU
1076114
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Do you have the z7 raised gell lettering in black with silver edge?
Question by: Corey jones on Jan 18, 2023, 12:49 PM
Hello Corey,
Unfortunately, we do not at this time, and they are not something we can source or order.
Closest we have right now is all black and black/gold at this link:
link: https://www.greatlakesskipper.com/search/?q=z+7+decal
Gene
Unfortunately, we do not at this time, and they are not something we can source or order.
Closest we have right now is all black and black/gold at this link:
link: https://www.greatlakesskipper.com/search/?q=z+7+decal
Gene
Answer by: Admin on Jan 18, 2023, 12:57 PM