Premier Boat Gauge Dash Panel K-388-014 | Johnson Evinrude Outboard

Boat part number 1052967 is a new OEM gauge dash panel for Premier pontoon boats, part number K-388-014 .
$329.95 MSRP: $445.43
GLS Stock #: 1052967-5N502
Only 1 left

Premier Boat Gauge Dash Panel K-388-014 | Johnson Evinrude Outboard

Boat part number 1052967 is a new OEM gauge dash panel for Premier pontoon boats, part number K-388-014 .

This gauge panel is constructed from plastic with a faux woodgrain pattern and glossy finish. It measures approximately 29 5/8" W x 5 1/8" H overall. It has (10) 1/8" Dia. mounting holes (hardware not included). It has (4) raw-ended wire leads and (1) 3-pin male connection.

This panel has (6) pre-installed Spun Silver series gauges from Faria. Each gauge except the systems check gauge is illuminated with a clear halogen bulb. Each gauge has a domed lens, silver colored bezel, spun silver face, and black needle with black graphics.

This panel features the following gauges:
  • (1) Fuel | GP9932A | (1) male spade and (3) threaded connections
  • (1) Tachometer | TC9004A | Gasoline | 4 / 6 / 8 / 10 / 12 pole outboard | (1) male spade and (3) threaded connections
  • (1) Volt Meter | VP9223A | (1) male spade and (2) threaded connections
  • (1) Speedometer | SE9401B | (2) male spades and (1) pitot connection
  • (1) Trim | GP9224B | Set up for OMC Johnson Evinrude engines (2001 and newer) | (1) male spade and (3) threaded connections)
  • (1) Systems Check | GP9910C | (1) 8-pin male connection
Note: Contains minor scuffs and scratches; due to storage and handling.

Specifications:
  • Boat Manufacturer: Premier Pontoons
  • Part Number: K-388-014
  • Part Manufacturer: Unavailable
  • Material: Plastic
  • Color: Woodgrain
  • Finish: Glossy
  • Overall Dimensions: 29 5/8" W x 5 1/8" H
  • Mounts: (10) 1/8" Dia. mounting holes
  • Fuel: Gasoline
  • Set Up For: 4 / 6 / 8 / 10 / 12 pole outboard
  • Used on These Engines: OMC Johnson Evinrude engines (2001 and newer)

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

Pigtail connector / harness not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Customer Questions

No questions yet. Be the first to ask the question!