Ranger Boat Steering Wheel Decals | Established 1968 Gold Brown (Pair) - All Questions
Ranger Boat Steering Wheel Decals | Established 1968 Gold Brown (Pair)
SKU
1022853
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Would the foam filled ranger decals be suitable to replace the decals on my seats that came off or are they for a different application ?
Question by: Jack on Jun 6, 2023, 10:01 AM
Hello Jack,
I'm afraid we don't know where Ranger originally intended them to be used. We don't know of any reason why they wouldn't work on a vinyl seat, but we would HIGHLY recommend adding some vinyl adhesive. No doubt the seats have absorbed oils in time, and that adhesive would most likely make a difference.
Hope this helps!
Gene
I'm afraid we don't know where Ranger originally intended them to be used. We don't know of any reason why they wouldn't work on a vinyl seat, but we would HIGHLY recommend adding some vinyl adhesive. No doubt the seats have absorbed oils in time, and that adhesive would most likely make a difference.
Hope this helps!
Gene
Answer by: Admin on Jun 7, 2023, 9:17 AM