Ranger Boat Limited Decal 7603502 | Chevy Trucks Gold / Black (Single) - All Questions
Ranger Boat Limited Decal 7603502 | Chevy Trucks Gold / Black (Single)
SKU
7101104
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Is this a sticker or decal I was reading the materials I'm looking for something that I can put on the tailgate of my truck to match my boat it says it's foam filled with hard plastic so I'm reading other articles like it's more of an adhesive sticker can I get some clarification please
Question by: Steve adams on Oct 13, 2021, 1:40 AM
Hi Steve,
Had one pulled, and it is foam filled, but pretty soft - not like a hard plastic. It is adhesive backed, so I don't know why you couldn't use them on your tailgate.
Hope this helps.
Gene
Had one pulled, and it is foam filled, but pretty soft - not like a hard plastic. It is adhesive backed, so I don't know why you couldn't use them on your tailgate.
Hope this helps.
Gene
Answer by: Gene Warmuth on Oct 13, 2021, 1:33 PM