Rinker Boat Decal 218613 | 2004 Captiva 192 / 212 / 232 (Set of 2) - All Questions
Rinker Boat Decal 218613 | 2004 Captiva 192 / 212 / 232 (Set of 2)
SKU
1051141
Do you have just the port side decal for Rinker Decal set 218613 available? I saw you have just the Starboard side available in a separate auction. I already have the starboard decal is why I am asking.
2004 Rinker Captiva 232 colors are yellow, grey, tan, black
2004 Rinker Captiva 232 colors are yellow, grey, tan, black
Question by: Kevin Snodgrass on Apr 2, 2021, 9:16 PM
Hi Kevin,
I do not have the port side available separately at this time. We must have received an excess amount of stbd rather than port. If you have any further questions, feel free to contact back. Thanks!
-
Jake
I do not have the port side available separately at this time. We must have received an excess amount of stbd rather than port. If you have any further questions, feel free to contact back. Thanks!
-
Jake
Answer by: Jake Doro on Apr 3, 2021, 9:43 AM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
already bought last week GLS Stock: 1051141, do you have something smaller to match that color, smaller to install higher just beside the Rinker logo as shown on the original boat? tks.
Question by: Francois Piche on Aug 15, 2022, 2:12 PM
Hello Francois,
Since we aren't Rinker dealers, we don't know what that piece would look like. Any chance you could email a photo?
Gene
Since we aren't Rinker dealers, we don't know what that piece would look like. Any chance you could email a photo?
Gene
Answer by: Admin on Aug 15, 2022, 2:20 PM