Rinker Boat Graphic Decals RIN005811 | Gray Captiva Stickers (Kit) - All Questions
Rinker Boat Graphic Decals RIN005811 | Gray Captiva Stickers (Kit)
SKU
1067530
Do you have metal letters for hull of Captiva 262. Missing the Letter I.
Question by: Gregg Shinn on Mar 10, 2021, 12:24 PM
Hello Gregg,
Unfortunately we don't currently have those decals and they are not something we can source or order. All we can suggest is to contact a dealer.
Sorry we could not help.
Gene
Unfortunately we don't currently have those decals and they are not something we can source or order. All we can suggest is to contact a dealer.
Sorry we could not help.
Gene
Answer by: Gene Warmuth on Mar 10, 2021, 1:51 PM
I have 1996 Rinker Captiva 232 Cuddy that the graphics on the sides are scratched pretty bad. It says Captiva 232. Do you have replacement for this? I was on your site and one of the graphics offered mentioned every boat model except the 232.
Question by: Thomas F Miklus on May 5, 2021, 1:37 PM
Hello Thomas,
We do have a number of Captiva 232 graphics, but don't know the specific model years on most of them. If we do have do have something it would be at the link below, but you'd need to scroll through to see if you recognize them.
Link: https://www.greatlakesskipper.com/catalogsearch/result/index/?q=captiva+232+decal&product_list_limit=96
Unfortunately they aren't soemthing we can source or order.
Gene
We do have a number of Captiva 232 graphics, but don't know the specific model years on most of them. If we do have do have something it would be at the link below, but you'd need to scroll through to see if you recognize them.
Link: https://www.greatlakesskipper.com/catalogsearch/result/index/?q=captiva+232+decal&product_list_limit=96
Unfortunately they aren't soemthing we can source or order.
Gene
Answer by: Gene Warmuth on May 5, 2021, 2:59 PM
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
I have a 2004 Rinker Captiva 232. It has the flag design for the decals. Do you have that one that has red, white blue and silver in the colors of the decal?
Thanks,
Ricky Gatlin
Thanks,
Ricky Gatlin
Question by: Ricky Gatlin on May 23, 2021, 2:43 PM
Hello Ricky,
Unfortunately we do not at this time, and they are not something we can source or order. All the Rinker grahics we can offer right now are shown on line at the link below:
Link: https://www.greatlakesskipper.com/decals-pinstriping/rinker-decals
Sorry we could not help.
Gene
Unfortunately we do not at this time, and they are not something we can source or order. All the Rinker grahics we can offer right now are shown on line at the link below:
Link: https://www.greatlakesskipper.com/decals-pinstriping/rinker-decals
Sorry we could not help.
Gene
Answer by: Gene Warmuth on May 24, 2021, 8:49 AM
I have a rinker captiva does this come with the 276 on it already or is it a special purchase. How long is the shipping to Ontario Canada
Question by: Robert Urbankowski on Jun 25, 2022, 11:13 AM
Hello Robert,
It only includes what is shown in the photos - doesn't include the 276. We do have a number of "276) decals at this link, but do not know which were made to go with the decals.
link: https://www.greatlakesskipper.com/search/?q=rinker+276+decal
Shipping cost is going to vary depending on your postal code, but you can put the decal into the shopping cart, change country, and enter your postal code to get options & costs.
Thank you,
Gene
It only includes what is shown in the photos - doesn't include the 276. We do have a number of "276) decals at this link, but do not know which were made to go with the decals.
link: https://www.greatlakesskipper.com/search/?q=rinker+276+decal
Shipping cost is going to vary depending on your postal code, but you can put the decal into the shopping cart, change country, and enter your postal code to get options & costs.
Thank you,
Gene
Answer by: Admin on Jun 26, 2022, 10:48 AM
Hi, a kit does it mean single graphic or for both sides?
Question by: Patrick St-Hilaire on Jul 14, 2022, 7:38 AM
Hello Patrick,
It includes both port and starboard sides.
Thank you,
Gene
It includes both port and starboard sides.
Thank you,
Gene
Answer by: Admin on Jul 14, 2022, 12:20 PM