Sailfish Boat Glass Windshield | 3006 Express 92 7/8 Inch (3PC) - All Questions
Sailfish Boat Glass Windshield | 3006 Express 92 7/8 Inch (3PC)
SKU
7310300
I have a 1997 Legend 16ft aluminum boat. I was thinking of replacing the windshield. How do I go about choosing the one I need? Windshield is mounted on a plastic moulding rasing it up. Any info is greatly appreciated.
Thank you!
Thank you!
Question by: Matt on Oct 3, 2021, 5:39 PM
Hello Matt,
Unfortunately we don't currently have one specific to your Legene and it isn't something we can source/order or cross reference to what we do have.
We aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately we don't currently have one specific to your Legene and it isn't something we can source/order or cross reference to what we do have.
We aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Gene Warmuth on Oct 4, 2021, 8:49 AM