Sea Doo Boat Decals 219903590 | 219903591SP 180 Stickers (Set of 2) - All Questions
Sea Doo Boat Decals 219903590 | 219903591SP 180 Stickers (Set of 2)
SKU
1043871
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
do you have the small parts missing the S and the P
Question by: Patrick Verrette on Jun 12, 2022, 1:21 PM
Hello Patrick,
Unfortunately, we do not at this time, and they are not something we can source or order. All the Sea Graphics we can offer are shown here:
link: https://www.greatlakesskipper.com/decals-pinstriping/sea-doo-boat-decals
Gene
Unfortunately, we do not at this time, and they are not something we can source or order. All the Sea Graphics we can offer are shown here:
link: https://www.greatlakesskipper.com/decals-pinstriping/sea-doo-boat-decals
Gene
Answer by: Admin on Jun 13, 2022, 8:46 AM
Does this fit a 2005 challenger 180
Question by: Bo johnson on Jul 2, 2022, 9:23 AM
Hello Bo,
I'm sorry, but we do not know. We are not able to cross reference them to specific boats. About all we can suggest is to contact a dealer, or just go by the measurements in the ad.
Gene
I'm sorry, but we do not know. We are not able to cross reference them to specific boats. About all we can suggest is to contact a dealer, or just go by the measurements in the ad.
Gene
Answer by: Admin on Jul 3, 2022, 10:11 AM
Avez-vous des photos coller sur le bateau pour voir le résultat
Question by: Eric on Aug 6, 2023, 8:28 AM
Bonjour Éric,
Je suis désolé, mais ce n'est pas le cas.
Gène
Je suis désolé, mais ce n'est pas le cas.
Gène
Answer by: Admin on Aug 6, 2023, 9:55 AM