Springfield Boat Seat Slide 3100300 | Four Winns Trac-Lock
Boat part number 8201098 is a new seat slide from Springfield Marine, part number 3100300 .
made for Four Winns Boats
$119.95 MSRP: $161.95
GLS Stock #: 8201098-FD511
Only 9 left
Boat part number 8201098 is a new seat slide from Springfield Marine, part number 3100300 . Commonly used on Four Winns boats, part number 048-1854 , but may used on other boats.
Manufacturer says this slide measures 13" L x 7 1/4" W x 2" H and travels 5 1/4" from aft to fore. We measure approximately it to be approximately 13 1/8" L x 7 1/8" W x 2" H overall. The mounting plate has a 5 x 5 mounting pattern, while the slide has a 5 x 5 and 5 x 12 mounting pattern (hardware not included). See photos for additional measurements.
Note: May contain minor scuffs and scratches; due to storage and handling.
Specifications:
Hardware and instruction / installation manual not included.
Manufacturer says this slide measures 13" L x 7 1/4" W x 2" H and travels 5 1/4" from aft to fore. We measure approximately it to be approximately 13 1/8" L x 7 1/8" W x 2" H overall. The mounting plate has a 5 x 5 mounting pattern, while the slide has a 5 x 5 and 5 x 12 mounting pattern (hardware not included). See photos for additional measurements.
Note: May contain minor scuffs and scratches; due to storage and handling.
Specifications:
- Boat Manufacturer: Four Winns
- Part Number: 048-1854
- Part Manufacturer: Springfield Marine
- Part Number: 3100300
- Material: Aluminum
- Color: Gray
- Overall Dimensions: 13 1/8" L x 7 1/8" W x 2" H
- Mounting Patterns: 5 x 5 (mounting plate) / 5 x 5 and 5 x 12 (slide)
Hardware and instruction / installation manual not included.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Can you tell if this will replace the slide on a 1998 Four Winns 238 Vista?
Question by: John Bron on Jun 16, 2023, 6:40 AM
Hello John,
I'm very sorry, but we are not dealers and don't know what was originally used on your 238. Do you know the diameter of your pedestal post? It should be either 2 3/8" or 2 7/8".
Gene
I'm very sorry, but we are not dealers and don't know what was originally used on your 238. Do you know the diameter of your pedestal post? It should be either 2 3/8" or 2 7/8".
Gene
Answer by: Admin on Jun 16, 2023, 9:05 AM
Will this slid attach to a standard bolt pattern of 5 1/4”?
Question by: Mike Cataldo on Mar 23, 2022, 1:12 PM
Hi Mike,
Tentatively yes. When it is slotted on at least one end, we've never seen one that wouldn't mate up with that 12 1/4" dimension.
Gene
Tentatively yes. When it is slotted on at least one end, we've never seen one that wouldn't mate up with that 12 1/4" dimension.
Gene
Answer by: Admin on Mar 23, 2022, 3:03 PM