Taylor Made Boat Windshield 70004200 | 32 5/8 Inch Smoke (Set of 2) - All Questions
Taylor Made Boat Windshield 70004200 | 32 5/8 Inch Smoke (Set of 2)
SKU
1096437
Does this fit a 1998 Maxum 1900?
Question by: Tim Hammond on Jun 19, 2022, 6:42 AM
HI Tim,
I'm sorry, but we do not know. We aren't able to cross reference the windshield to specific boats. You'd pretty much need to just go by the measurements in the ad.
Gene
I'm sorry, but we do not know. We aren't able to cross reference the windshield to specific boats. You'd pretty much need to just go by the measurements in the ad.
Gene
Answer by: Admin on Jun 19, 2022, 12:21 PM
Would this work on a 19 bow rider instead if replacement windshield?
Question by: Edward McDonough on Jun 24, 2022, 1:25 PM
Hello Edward,
I'm very sorry, but we are not able to cross reference the windshield to specific boats, and they aren't something we can source or order. You'd pretty much need to just go by the measurements in the ad.
Gene
I'm very sorry, but we are not able to cross reference the windshield to specific boats, and they aren't something we can source or order. You'd pretty much need to just go by the measurements in the ad.
Gene
Answer by: Admin on Jun 24, 2022, 2:18 PM
Looking for replacement windshield for 1995 Carver 320 fly bridge.
Question by: John Hart on Jun 29, 2022, 7:39 AM
Hi John,
Unfortunately, we don't currently show one specific to your 320 and it isn't something we can source/order or cross reference to what we do have.
Going back to '95, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your 320 and it isn't something we can source/order or cross reference to what we do have.
Going back to '95, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Jun 29, 2022, 11:19 AM
How does it seam in middle
And do you have a picture of track
And do you have a picture of track
Question by: Douglas Mcbride on Jul 5, 2022, 5:44 PM
Hello Douglass,
I'm sorry, but we don't know how exactly this was intended to mount, or what might connect the two pieces. They came to us without any installation instructions, and everything we were able to determine about them, we have in the ad.
Gene
I'm sorry, but we don't know how exactly this was intended to mount, or what might connect the two pieces. They came to us without any installation instructions, and everything we were able to determine about them, we have in the ad.
Gene
Answer by: Admin on Jul 6, 2022, 10:32 AM
Do you have a windshield for a 77 cahckmate v-mate ll?
Question by: Tim Yates on Jul 13, 2022, 4:27 PM
Hello Tim,
Unfortunately, we don't currently show one specific to your v-mate and it isn't something we can source/order.
We aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your v-mate and it isn't something we can source/order.
We aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Jul 14, 2022, 9:44 AM
Looking for replacement (fly bridge) windshield for a 1995 Carver Voyager 3
Question by: John Hart on Aug 3, 2022, 2:05 PM
Hello John,
Unfortunately, we don't currently show one specific to your Carver and it isn't something we can source/order or cross reference to what we do have.
Going back to '95, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and just kind of make it work. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your Carver and it isn't something we can source/order or cross reference to what we do have.
Going back to '95, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and just kind of make it work. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Aug 4, 2022, 8:06 AM
I’m looking for a windshield for my 2000 Gekko gts 20 ski boat
Question by: George Shilich on Aug 21, 2022, 9:51 AM
Hello George,
Unfortunately, we don't currently show one specific to your Gekko and it isn't something we can source/order or cross reference to what we do have.
Going back to 2000, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your Gekko and it isn't something we can source/order or cross reference to what we do have.
Going back to 2000, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Aug 21, 2022, 10:51 AM
Looking for something like this that will fit a 1990 formula boat
Question by: Mike Ross on Aug 30, 2022, 6:08 PM
Hi Mike,
Unfortunately, we don't currently show one specific to your Forumula and it isn't something we can source/order.
Going back to '90, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/a/b/ab56734c7d4cd1a6ff45175ff465b4da.jpg?optimize=low&bg-color=255,255,255&fit=bounds&height=700&width=700&canvas=700:700
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your Forumula and it isn't something we can source/order.
Going back to '90, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/a/b/ab56734c7d4cd1a6ff45175ff465b4da.jpg?optimize=low&bg-color=255,255,255&fit=bounds&height=700&width=700&canvas=700:700
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Aug 31, 2022, 8:19 AM
I have a 1974 correct craft walk thru boat that I want to put a new sleek plexiglass windshield on just the outsides and leave center open. This windshield looks perfect but I won’t actually now about the fit until I sit it on my dash. If the windshield doesn’t fit and I properly pack and pay return shipping in the event it doesn’t work, will you accept a return? Thank you Zach
Question by: Zach Hancock on Sep 9, 2022, 5:09 PM
Hello Zach,
You can return within 30 days of purchase as long as it has not been altered in any way. There is an 8% restock for a refund which is waived if you can use a store credit (good for two years) Either way though, you'd be responsible for the shipping.
Thank you!
Gene
You can return within 30 days of purchase as long as it has not been altered in any way. There is an 8% restock for a refund which is waived if you can use a store credit (good for two years) Either way though, you'd be responsible for the shipping.
Thank you!
Gene
Answer by: Admin on Sep 10, 2022, 9:45 AM
I’m converting my 89 Stratos into a speed boat style. Will these windshields for for my build ? Can I get other parts also for this conversion like a whole front dash which goes all the way across to accommodate this windshield…
Question by: Joseph Covas on Sep 21, 2022, 4:05 PM
Hello Joseph,
I'm afraid we aren't able to cross reference any of the components we have from Stratos to your boat. As far as the windshield goes, you'd pretty much need to measure where exactly you would be mounting it, then see if we have any that fit. Those measurement photos show how/where we measure them.
For the other parts, you'd need to just scroll through our Stratos category (link below) to see if we have something you feel will work for you.
link: https://www.greatlakesskipper.com/oem-parts-and-accessories/stratos-boats
Sorry we could not help more.
Gene
I'm afraid we aren't able to cross reference any of the components we have from Stratos to your boat. As far as the windshield goes, you'd pretty much need to measure where exactly you would be mounting it, then see if we have any that fit. Those measurement photos show how/where we measure them.
For the other parts, you'd need to just scroll through our Stratos category (link below) to see if we have something you feel will work for you.
link: https://www.greatlakesskipper.com/oem-parts-and-accessories/stratos-boats
Sorry we could not help more.
Gene
Answer by: Admin on Sep 22, 2022, 8:19 AM