Weeres Boat Dash Panel Set K-388-019 | Inboard Outboard (3 PC)
Boat part number 1053156 is a new OEM 3-piece gauge and switch panel set for Weeres pontoon boats, part number K-388-019 .
made for Weeres Pontoons
$369.95 MSRP: $499.43
GLS Stock #: 1053156-FD873
Only 7 left
Boat part number 1053156 is a new OEM 3-piece gauge and switch panel set for Weeres pontoon boats, part number K-388-019 .
This set includes the following:
This gauge panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 29 1/2" W x 5" H overall and has (10) 1/8" Dia. mounting holes (hardware not included). It has (4) O-ring terminals, (4) single pin female connections and (1) 3-pin male connection.
This panel has (4) pre-installed Spun Silver gauges from Faria. Each clear halogen bulb illuminated gauge has a domed lens, silver colored bezel, brushed silver face, and black needle with black graphics.
This panel features the following gauges:
This switch panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 8 1/4" W x 5" H overall and has (4) 1/8" Dia. mounting holes (hardware not included). There is (1) 8-pin female and (2) 3-pin female connections.
This panel features the following:
This switch panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 9 3/4" W x 5" H overall and has (4) 1/8" Dia. mounting holes (hardware not included). It has (1) 3-pin male connection.
This panel features the following:
This set includes the following:
- (1) Gauge Panel
- (1) Power / Light Switch Panel
- (1) Accessory Switch Panel
This gauge panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 29 1/2" W x 5" H overall and has (10) 1/8" Dia. mounting holes (hardware not included). It has (4) O-ring terminals, (4) single pin female connections and (1) 3-pin male connection.
This panel has (4) pre-installed Spun Silver gauges from Faria. Each clear halogen bulb illuminated gauge has a domed lens, silver colored bezel, brushed silver face, and black needle with black graphics.
This panel features the following gauges:
- (1) Fuel Level | GP9923A | (1) single male spade and (3) threaded connections
- (1) Tachometer | TC9004B | Gasoline | 4 / 6 / 8 / 10 / 12 cylinder inboard and 1 / 2 / 3 / 4/ 5 pole outboard | (1) single male spade and (4) threaded connections
- (1) Volt Meter | VP9223A | (1) single male spade and (3) threaded connections
- (1) Speedometer | SE9401B | (2) single male spades and (1) pitot connection
This switch panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 8 1/4" W x 5" H overall and has (4) 1/8" Dia. mounting holes (hardware not included). There is (1) 8-pin female and (2) 3-pin female connections.
This panel features the following:
- (1) Master Power ON/OFF illuminated rocker switch
- (1) Navigation Lights ON/OFF/ON illuminated rocker switch
- (1) Docking Lights ON/OFF illuminated rocker switch
- (5) Push to reset breaker switches
- (1) 12V receptacle
- (1) Red push button switch
This switch panel is constructed from silver plastic with a brushed pattern and glossy finish. It measures approximately 9 3/4" W x 5" H overall and has (4) 1/8" Dia. mounting holes (hardware not included). It has (1) 3-pin male connection.
This panel features the following:
- (2) Accessory ON/OFF illuminated rocker switches
- (3) Push to reset breaker switches
- (1) 12V receptacle
- Boat Manufacturer: Weeres Pontoons
- Part Number: K-388-019
- Part Manufacturer: Unavailable
- Material: Plastic
- Color: Silver
- Pattern: Brushed
- Finish: Glossy
- Fuel: Gasoline
- Set Up For: 4 / 6 / 8 / 10 / 12 cylinder inboard and 1 / 2 / 3 / 4/ 5 pole outboard
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.