Faria Boat Gauge Set | Platinum Series I/O Evinrude (5 Piece)
Boat part number 1096096 is a new 5-piece Platinum series gauge set from Faria, part number unavailable.
made for Custom Applications
$259.95
MSRP: $350.93
GLS Stock #:
1096096-FK640
20 in stock
Boat part number 1096096 is a new 5-piece Platinum series gauge set from Faria, part number unavailable.
These clear halogen illuminated gauges feature a domed lens, silver colored bezel, black and spun silver face, red/black needles, and white graphics. Each large gauge measures approximately 3 3/4" Dia. across the bezel and requires an approximate 3 1/4" Dia. cutout. Each small gauge measures approximately 2 1/4" Dia. across the bezel and requires an approximate 2" Dia. cutout.
Set includes the following gauges:
Specifications:
These clear halogen illuminated gauges feature a domed lens, silver colored bezel, black and spun silver face, red/black needles, and white graphics. Each large gauge measures approximately 3 3/4" Dia. across the bezel and requires an approximate 3 1/4" Dia. cutout. Each small gauge measures approximately 2 1/4" Dia. across the bezel and requires an approximate 2" Dia. cutout.
Set includes the following gauges:
- (1) Speedometer | P/N: SE9851A | (1) pitot, (2) spades
- (1) Tachometer | P/N: TC8508A | Gasoline | 4/6/8/10/12 cylinder inboard / pole outboard | (4) threaded, (1) spade
- (1) Trim | P/N: GBC118A | Johnson Evinrude engines | (1) 4-pin male Deutsch
- (1) Volt | P/N: VBC020A | (1) 4-spade male Metri Pak
- (1) Fuel Level | P/N: GP7879A | (3) threaded, (1) spade
Specifications:
- Part Manufacturer: Faria
- Series: Platinum
- Part Number: Unavailable
- Color: Silver / Black
- Cutout Dimensions: 3 1/4" Dia. / 2" Dia.
- Overall Dimensions: 3 3/4" Dia. / 2 1/4" Dia.
- Fuel: Gasoline
- Set Up For: 4/6/8/10/12 cylinder inboard / pole outboard
- Engines: Johnson Evinrude
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.