Lund Boat Gauge Dash Panel 2095418 | Tyee 21 5/8 x 4 3/8 Inch Greywood
Boat part number 8302729 is a new OEM gauge dash panel for a Lund Tyee, part number 2095418 .
made for Lund Boats
$269.95 MSRP: $364.43
GLS Stock #: 8302729-FJ552
Only 3 left
Boat part number 8302729 is a new OEM gauge dash panel for a Lund Tyee, part number 2095418 .
Constructed out of marine grade plastic in a greywood color with a glossy finish. Measures approximately 21 5/8" L x 4 3/8" H overall. Has (1) cutout that measures approximately 1 1/8" Dia. and (1) 12V power outlet.
This panel hosts (4) pre-installed custom Mercury branded gauges from Teleflex. These clear halogen bulb illuminated gauges features silver bezels, white faces, black lettering, numerals, accents, black needle with orange tips, and red Mercury logo on the face.
These gauges are as follows:
Constructed out of marine grade plastic in a greywood color with a glossy finish. Measures approximately 21 5/8" L x 4 3/8" H overall. Has (1) cutout that measures approximately 1 1/8" Dia. and (1) 12V power outlet.
This panel hosts (4) pre-installed custom Mercury branded gauges from Teleflex. These clear halogen bulb illuminated gauges features silver bezels, white faces, black lettering, numerals, accents, black needle with orange tips, and red Mercury logo on the face.
These gauges are as follows:
- (1) Fuel Gauge | 895291A41 | Has (3) threaded bolt connectors | Set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses
- (1) 65 MPH Speedometer | 895285A43 | Has pitot connector
- (1) 7000 RPM Tachometer | 895283A45 | Has (4) threaded bolt connectors
- (1) Trim Gauge | 895292A41 | Has (3) threaded bolt connectors | Set up for Mercury engines
- Boat Manufacturer: Lund
- Model: Tyee
- Part Number: 2095418
- Materials: Plastic
- Color: Greywood
- Finish: Glossy
- Overall Dimensions: 21 5/8" L x 4 3/8" H
- Connections: (1) 9-Spade Male and (1) 2-Spade Male
- Tachometer set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses
- Trim set up for Mercury engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.