Lund Boat Gauge Dash Panel 2095422 | Driftwood Series 21 3/4 Inch
Boat part number 8302727 is a new gauge dash panel from Lund, part number 2095422 .
made for Lund Boats
$269.95 MSRP: $364.43
GLS Stock #: 8302727-FK422
Only 1 left
Boat part number 8302727 is a new gauge dash panel from Lund, part number 2095422 .
Constructed out of marine grade plastic in a faux greywood color with a glossy finish. Measures approximately 21 3/4" L x 4 7/8" H overall. Hosts (1) cutout measuring approximately 1 1/8" Dia. and (1) 12V power outlet.
This panel features (4) pre-stalled Driftwood Series gauges from Teleflex. These clear halogen bulb gauges feature black bezels, domed lens, gray face, black lettering, numerals, accents, and white needles.
The pre-installed gauges are as follows:
Constructed out of marine grade plastic in a faux greywood color with a glossy finish. Measures approximately 21 3/4" L x 4 7/8" H overall. Hosts (1) cutout measuring approximately 1 1/8" Dia. and (1) 12V power outlet.
This panel features (4) pre-stalled Driftwood Series gauges from Teleflex. These clear halogen bulb gauges feature black bezels, domed lens, gray face, black lettering, numerals, accents, and white needles.
The pre-installed gauges are as follows:
- (1) Fuel Gauge | 61549F | Has (3) threaded bolt connectors.
- (1) 65 MPH Speedometer | 62372F | Has pitot connector.
- (1) 7000 RPM Tachometer | 62371F | Has (4) threaded bolt connectors | Set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses.
- (1) Trim Gauge | 62375F | Has (3) threaded bolt connectors | Set up for Honda engines.
- Boat Manufacturer: Lund
- Part Number: 2095422
- Materials: Plastic
- Color: Greywood
- Finish: Glossy
- Overall Dimensions: 21 3/4" L x 4 7/8" H
- Connection: (1) 2-Spade Male and (4) Single Bullet connectors
- Tachometer set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses
- Trim set up for Honda engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.