Teleflex Boat Trim Gauge 59709 | Lund 1987626 Mercury 2 1/8 Inch Black
Boat part number 8303480 is a new trim gauge from Lund Boats, part number 1987626 .
made for Lund Boats
$39.95 MSRP: $53.93
GLS Stock #: 8303480-BX535
Only 2 left
Boat part number 8303480 is a new trim gauge from Lund Boats, part number 1987626 . Manufactured by Teleflex Marine, part number 59709 . Can be used on other boats.
Part of the Sahara Black series, this clear halogen illuminated gauge features a domed lens, beige face, black bezel, black lettering, numerals, and accents, with a red tipped black needle.
Measures approximately 2 3/8" diameter across the face x 2 3/4" deep overall. Requires an approximate 2 1/8" diameter cutout. Hosts (1) spade male and (3) threaded bolt connections labeled "S", "G" and "I". Set up for Mercury, Volvo, and Yamaha engines 2001 and newer. Mounting bracket included.
Sold as a single.
Specifications:
Part of the Sahara Black series, this clear halogen illuminated gauge features a domed lens, beige face, black bezel, black lettering, numerals, and accents, with a red tipped black needle.
Measures approximately 2 3/8" diameter across the face x 2 3/4" deep overall. Requires an approximate 2 1/8" diameter cutout. Hosts (1) spade male and (3) threaded bolt connections labeled "S", "G" and "I". Set up for Mercury, Volvo, and Yamaha engines 2001 and newer. Mounting bracket included.
Sold as a single.
Specifications:
- Boat Manufacturer: Lund Boats
- Year / Model: Unavailable
- Part Number: 1987626
- Part Manufacturer: Teleflex Marine
- Part Number: 59709
- Colors: Beige (Face) | Black
- Overall Dimensions: 2 3/8" Dia. x 2 3/4" D
- Cutout: 2 1/8" Dia.
- Connections: (3) Threaded Bolt | (1) Spade Male
- Set up for Mercury, Volvo, Yamaha engine 2001 and Newer
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.